| Nashriyot | Тошкент кимё-технология институти |
|---|---|
| Shahar | Toshkent |
| ISSN | 1992-9498 |
| e-ISSN | 2181-1121 |
| Tashkil etilgan | 2003 |
| Nashr tillari | Ingliz, O‘zbek |
| Nashr davriyligi | Yiliga 4 marta |
| Maqolalar soni | 427 |
| OAK holati | Ro‘yxatda |
Since the cement kiln process has various advantages for waste incineration, the waste utilization as alternative fuel has been widely applied in the cement process. For waste utilization in kiln process, it is…
A comprehensive physicochemical study of the aqueous “urea – glycine” system was conducted to establish the mechanisms of intermolecular interaction and stability parameters for the development of modified liquid…
The aim of the work is to find ways to use cryotic metals that also provide added value to the economy, using the example of tantalum and zirconium. Among the critical metals, there are those that are rarely found in…
The aim of study is synthesize mixed oxide composites based on titanium dioxide, iron and molybdenum oxides from industrial waste materials and evaluated for their photocatalytic degradation performance of…
The aim of this study was to produce lightweight thermal insulation bricks based on Djerdanak clay shale with the addition of wood sawdust. The starting materials were clay shale from the Djerdanak deposit, fireclay…
Titanium is classified as a critical metal. It serves as a raw material for a wide range of industries owing to its unique properties – high strength at low density, corrosion resistance, and biocompatibility makes it…
The aim of the work was to obtain high-density optically transparent ceramic samples by sintering cubic modification Er2O3 and Yb2O3 oxides micropowders at the pressure of 7 GPa and the heating current power of 0.6–1.0…
The purpose of this study is to analyze the chemical, mineralogical, and fractional composition of sylvinite from the Khodjaikan deposit in Uzbekistan in order to assess its potential for potassium fertilizer…
The primary objective of this study is to optimize the process of isolating the C9 hydrocarbon fraction from pyrolysis distillate and to evaluate the impact of various temperature regimes on the product composition. To…
In this study we aimed to obtain a novel recombinant β-galactosidase baculovirus using the Bombyx mori baculovirus – insect cell expression system. A new recombinant plasmid was constructed on the basis of the pBacPAK8…
The aim of this study is to perform quantum-chemical modeling of mixed-ligand complexes of trivalent lanthanoid ions (Ln³⁺) involving primary ligands — 2-amino-1-methylbenzimidazole (MAB) and…
The aim of the work is to study the transformations of quartz raw materials as a result of high-temperature exposure. The objects of the study were quartzite from the Dzherdanak deposit in the Surkhandarya region and…
The hot climatic conditions of Uzbekistan are favorable for the development of mesophilic bacteria in bread products. The quality of the water used in this process has a great influence. The purpose of the study is to…
Comparative, analytical and experimental studies of methods for obtaining vegetable oils from oilseeds have been conducted, the purpose was to determine the advantages and disadvantages of technologies used in industry…
One of the main problems of our time is the sharp increase in alimentary-dependent diseases or so-called "diseases of civilization" caused by unbalanced nutrition, namely a stable deficiency or excess of nutrients with…
The aim of this study was the synthesis and structural investigation of coordination compounds of selected 3d-metals with 2-(phenylmethyl)-1H-benzimidazole (FAB) using IR spectroscopy. Complexes of copper(II)…
Known sources of high-quality raw materials are depleted. To meet the growing demand for porcelain products, natural raw materials from new deposits are being studied. The aim of the study is to develop a composition of…
Currently, one of the most effective and cost-effective ways to modify the properties of polyethylene is to introduce various fillers of organic or inorganic origin. The purpose of this work was to study the effect of…
The aim of this work is the synthesis of iodine N,N-diallylphthalimide and the study of its radical polymerization. In this regard, the synthesis of iodine N,N-diallylphthalimide was carried out in two stages: at the…
The aim of the study was to investigate the possibility of using natural bentonite samples obtained from the Qiziltepa district of Navoiy region in drilling operations. Within the scope of the study, the chemical and…
Coal is not only a heat source for clinker burning but also the coal ash after combustion plays a large role in the quality of clinker mixed with hot meals in the kiln. Since the properties of coal vary depending on the…
The aim of the study was preparation of nanosized silver particles by electrolysis from silver-containing scrap from electrical engineering production. For this purpose, at the first stage, silver particles with a size…
The aim of this work is to synthesize Nd2O3 nanotubes via chemical deposition followed by thermal treatment. Nd(OH)3 nanotubes were synthesized using Nd(NO3)3 as a precursor and NaOH as a precipitant. After thermal…
The aim of the study is to conduct a comparative analysis of the technological properties of samples of bakery flour obtained from local and imported varieties of wheat grain at enterprises in Uzbekistan. Existing…
The aim of the work is to study a new method of thermochemical synthesis of luminescent powder of lutetium-aluminium garnet activated by cerium ions (Lu3Al5O12:Се3+) using nitric acid salts of lutetium, aluminium and…
The aim of the study was to conduct research to determine the possibility of predicting the approximate fatty acid composition of blends based on the iodine number. The fatty acid composition was determined by the…
The aim of this work is to study the enzymatic transformation of acetic acid into ethyl acetate by immobilized lipases of the fungus Rhizopus microsporus UzLT-1 obtained on the basis of silica gel and…
Loss on ignition (LOI) of cement, raw materials and raw mixes in cement industry is specified as the weight loss at 900~1000 oC and 15~30 minutes in the standards of each region (GOST, ISO, ASTM, JIS, KS) in the world…
The aim of this study is to investigate the adsorption kinetics of Cu(II) and Ni(II) ions from aqueous solutions using an adsorbent obtained by treating rice husk with a solution of monoethanolamine. The experiments…