The aim of this study was to produce lightweight thermal insulation bricks based on Djerdanak clay shale with the addition of wood sawdust. The starting materials were clay shale from the Djerdanak deposit, fireclay made from it, and wood chips—a waste product from the wood processing industry. The optimal brick composition was determined to include 60% clay shale, 40% fireclay made from clay shale, and 14% wood chips (over 100%). The apparent density of the optimal brick composition corresponds to an apparent product density of 1 g/cm³ and a compressive strength of 3.6 N/mm². The microstructure of the material demonstrates a uniform distribution of all elements. Based on chemical, X-ray diffraction, and EDS analyses, it is hypothesized that a solid solution of silica in mullite forms as the main crystalline phase.
| Mualliflar | Mastura Kh. ARIPOVA, Sarvar T. BOZOROV |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2025-12-01 |
| Jild | 2025 |
| Son | 4 |
| Til | en |
| DOI | 10.70189/1992-9498.1701 |
DOI: 10.70189/1992-9498.1701 · Maqolaning asl sahifasi · PDF
The aim of study is synthesize mixed oxide composites based on titanium dioxide, iron and molybdenum oxides from industrial waste materials and evaluated for their photocatalytic degradation performance of…
Titanium is classified as a critical metal. It serves as a raw material for a wide range of industries owing to its unique properties – high strength at low density, corrosion resistance, and biocompatibility makes it…
The aim of the work is to find ways to use cryotic metals that also provide added value to the economy, using the example of tantalum and zirconium. Among the critical metals, there are those that are rarely found in…
The aim of the work was to obtain high-density optically transparent ceramic samples by sintering cubic modification Er2O3 and Yb2O3 oxides micropowders at the pressure of 7 GPa and the heating current power of 0.6–1.0…
A comprehensive physicochemical study of the aqueous “urea – glycine” system was conducted to establish the mechanisms of intermolecular interaction and stability parameters for the development of modified liquid…
The purpose of this study is to analyze the chemical, mineralogical, and fractional composition of sylvinite from the Khodjaikan deposit in Uzbekistan in order to assess its potential for potassium fertilizer…
Since the cement kiln process has various advantages for waste incineration, the waste utilization as alternative fuel has been widely applied in the cement process. For waste utilization in kiln process, it is…
The primary objective of this study is to optimize the process of isolating the C9 hydrocarbon fraction from pyrolysis distillate and to evaluate the impact of various temperature regimes on the product composition. To…
The aim of this work was to obtain solid extractants by impregnating the organic reagent 1-phenyl-1,3-butadione (BNA) onto carriers based on styrene-divinylbenzene copolymers (PAD600, PAD400) as well as activated…
In this study we aimed to obtain a novel recombinant β-galactosidase baculovirus using the Bombyx mori baculovirus – insect cell expression system. A new recombinant plasmid was constructed on the basis of the pBacPAK8…