The aim of the study was preparation of nanosized silver particles by electrolysis from silver-containing scrap from electrical engineering production. For this purpose, at the first stage, silver particles with a size of 0.2–2 microns were obtained by the cementation method, confirmed by the results of scanning electron microscopy. A silver anode for the electrolysis unit was created from the obtained silver particles by the melting method. At the second stage, electrolysis was carried out on a unit with rotating electrodes, in which the cathode was made of platinum. Optimum conditions for the electrolysis process, carried out at a voltage of 0.8 V, were determined. The optimum speed of electrode rotation (900 rpm) was established. Polyvinyl alcohol was used to prevent aggregation of silver particles in the suspension. Its optimum amount, as well as the duration (20–25 min) and the optimum process temperature (35 °C) necessary for obtaining silver particles in the range of 5–20 nm were determined. . The presence of particles of this size is proven by images obtained with a transmission electron microscope.
| Mualliflar | Umar A. YAKHYAEV, Mastura Kh. ARIPOVA, R. V. Mkrtchyan, Dilrabo A. MUKHTOROVA |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2025-06-27 |
| Jild | 2025 |
| Son | 2 |
| Til | en |
| DOI | 10.70189/1992-9498.1672 |
DOI: 10.70189/1992-9498.1672 · Maqolaning asl sahifasi
Coal is not only a heat source for clinker burning but also the coal ash after combustion plays a large role in the quality of clinker mixed with hot meals in the kiln. Since the properties of coal vary depending on the…
The aim of this work is to synthesize Nd2O3 nanotubes via chemical deposition followed by thermal treatment. Nd(OH)3 nanotubes were synthesized using Nd(NO3)3 as a precursor and NaOH as a precipitant. After thermal…
The aim of the study is to conduct a comparative analysis of the technological properties of samples of bakery flour obtained from local and imported varieties of wheat grain at enterprises in Uzbekistan. Existing…
The aim of the study was to investigate the possibility of using natural bentonite samples obtained from the Qiziltepa district of Navoiy region in drilling operations. Within the scope of the study, the chemical and…
The aim of the work is to study a new method of thermochemical synthesis of luminescent powder of lutetium-aluminium garnet activated by cerium ions (Lu3Al5O12:Се3+) using nitric acid salts of lutetium, aluminium and…
The aim of this work is the synthesis of iodine N,N-diallylphthalimide and the study of its radical polymerization. In this regard, the synthesis of iodine N,N-diallylphthalimide was carried out in two stages: at the…
The aim of the study was to conduct research to determine the possibility of predicting the approximate fatty acid composition of blends based on the iodine number. The fatty acid composition was determined by the…
Currently, one of the most effective and cost-effective ways to modify the properties of polyethylene is to introduce various fillers of organic or inorganic origin. The purpose of this work was to study the effect of…
The aim of this work is to study the enzymatic transformation of acetic acid into ethyl acetate by immobilized lipases of the fungus Rhizopus microsporus UzLT-1 obtained on the basis of silica gel and…