The aim of the study was to conduct research to determine the possibility of predicting the approximate fatty acid composition of blends based on the iodine number. The fatty acid composition was determined by the chromatographic method and the results were subsequently used to identify the composition of blends by determining the iodine number. The iodine number was determined by calculation and titrimetric methods, comparing the differences between the obtained values. The detected deviations in values between the two methods do not exceed 0.4%, which means that it is possible to predict the approximate fatty acid composition of blends based on the iodine number.
| Mualliflar | Adiba M. SERKAEVA, Akhror A. ABDURAKHIMOV, Nafisa S. HUSANOVA, Kamar Serkaev |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2025-06-27 |
| Jild | 2025 |
| Son | 2 |
| Til | en |
| DOI | 10.70189/1992-9498.1671 |
DOI: 10.70189/1992-9498.1671 · Maqolaning asl sahifasi · PDF
The aim of the work is to study a new method of thermochemical synthesis of luminescent powder of lutetium-aluminium garnet activated by cerium ions (Lu3Al5O12:Се3+) using nitric acid salts of lutetium, aluminium and…
The aim of this work is to study the enzymatic transformation of acetic acid into ethyl acetate by immobilized lipases of the fungus Rhizopus microsporus UzLT-1 obtained on the basis of silica gel and…
The aim of the study is to conduct a comparative analysis of the technological properties of samples of bakery flour obtained from local and imported varieties of wheat grain at enterprises in Uzbekistan. Existing…
The purpose of the study is to determine the effect of changes in the chemical composition of the rock at the Dzherdanak deposit on its phase composition and thermal properties. Samples from different points of the…
The aim of this work is to synthesize Nd2O3 nanotubes via chemical deposition followed by thermal treatment. Nd(OH)3 nanotubes were synthesized using Nd(NO3)3 as a precursor and NaOH as a precipitant. After thermal…
The aim of the research is to study the effect of the residual content of vegetable oil hydrogenation catalysts on the quality indicators of the resulting fat masses and to develop recommendations for improving the…
The aim of the study was preparation of nanosized silver particles by electrolysis from silver-containing scrap from electrical engineering production. For this purpose, at the first stage, silver particles with a size…
The article studies the influence of solid-phase and melt synthesis methods on the structure and electrochemical properties of the Na3Fe2(PO4)3 polycrystals. If the solid-phase synthesis of the Na3Fe2(PO4)3 polycrystals…
Coal is not only a heat source for clinker burning but also the coal ash after combustion plays a large role in the quality of clinker mixed with hot meals in the kiln. Since the properties of coal vary depending on the…
The nature and structure of the coloring substances of vegetable oils differ from each other, due to the manifestation of a certain degree of polarization, which allows the use of polar adsorbents with high selectivity…