This article examines the static analysis of a split-cylinder shaft and the process of calculating its torsion angle along with its strength. Using static analysis, forces, moments, stresses, and deformations acting on the shaft are determined. The research focuses on calculating the strength of the split-cylinder shaft in initial cotton processing enterprises and ensuring that the torsion angle remains within the permissible limits. The static equilibrium process, the uniform distribution of forces, shear forces, and moment diagrams are analyzed in detail. Additionally, the article provides information about the material properties of the shaft and its performance under mechanical conditions. The study also highlights the importance of both static and dynamic equilibrium, as well as the necessary measures to improve safety and economic efficiency in technological machinery operations. This article offers practical recommendations for improving the construction of split-cylinder shafts and ensuring their effective performance in industrial sectors.
| Mualliflar | Mirzaumidov, Asilbek, Azizov, Javlonbek, Siddiqov, Anvarbek |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 196-202 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.61151/stjniet.v10i1.746 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v10i1.746 · Maqolaning asl sahifasi
Split-cylinder shaft, static analysis, torsion angle, elasticity modulus, moment of inertia, shear force, moment diagram, static equilibrium, dynamic equilibrium, technological process, force distribution, safety, engineering design, mechanical systems
| APA | Mirzaumidov, Asilbek, Azizov, Javlonbek, & Siddiqov, Anvarbek (2025). STATIC ANALYSIS OF THE SPINDLE SHAFT WITH A SPLIT CYLINDER. Наманган муҳандисликтехнология институти илмийтехника журнали, 10(1), 196-202. https://doi.org/10.61151/stjniet.v10i1.746 |
|---|---|
| GOST (OAK) | Mirzaumidov, Asilbek, Azizov, Javlonbek, Siddiqov, Anvarbek STATIC ANALYSIS OF THE SPINDLE SHAFT WITH A SPLIT CYLINDER // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2025. – T. 10, № 1. – P. 196-202. – DOI: 10.61151/stjniet.v10i1.746. |
| MLA | Mirzaumidov, Asilbek, Azizov, Javlonbek, and Siddiqov, Anvarbek. “STATIC ANALYSIS OF THE SPINDLE SHAFT WITH A SPLIT CYLINDER.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(1), 196-202, 2025. https://doi.org/10.61151/stjniet.v10i1.746 |
| Chicago | Mirzaumidov, Asilbek, Azizov, Javlonbek, and Siddiqov, Anvarbek. “STATIC ANALYSIS OF THE SPINDLE SHAFT WITH A SPLIT CYLINDER.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(1), 196-202 (2025). https://doi.org/10.61151/stjniet.v10i1.746 |
| Harvard | Mirzaumidov, Asilbek, Azizov, Javlonbek, and Siddiqov, Anvarbek (2025) ‘STATIC ANALYSIS OF THE SPINDLE SHAFT WITH A SPLIT CYLINDER’, Наманган муҳандисликтехнология институти илмийтехника журнали, 10(1), 196-202. https://doi.org/10.61151/stjniet.v10i1.746 |
| BibTeX | @article{mirzaumidovasilbek2025,
title = {STATIC ANALYSIS OF THE SPINDLE SHAFT WITH A SPLIT CYLINDER},
author = {Mirzaumidov, Asilbek and Azizov, Javlonbek and Siddiqov, Anvarbek},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2025},
volume = {10},
number = {1},
pages = {196-202},
doi = {10.61151/stjniet.v10i1.746},
url = {https://doi.org/10.61151/stjniet.v10i1.746}
} |
Boshqa maqola uchun iqtibos tayyorlash
The article analyzes the modern range of compression materials, highlighting key factors such as the elasticity, deformation, and abrasion resistance properties of the materials. In the process of designing compression…
The crankshaft group (crankshaft, main and connecting rod bearings) is one of the most critical units of a diesel locomotive, which largely determines its service life, as well as reliability, timing, volume and cost of…
Corrosion occurs as a result of friction between moving parts of machines, which leads to the destruction of surfaces. As a result, the dimensions of parts change and the deviation from the required technical and…
All spinning products, from staple fiber to yarn, are uneven in both linear density and texture. The greater the unevenness, the worse the quality of the product. There are various reasons for unevenness. The impact…
Abstract. In this article, we will discuss the identification and mechanism of the application of microorganisms to fertilizers in soil processing. This will help to provide microbiological fertilizer research processes…
Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of…
The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum…
The review of scientific research works devoted to the improvement of the linterization process is devoted to the analytical analysis of literary sources and the current state of technology and technology of the…
The increase in the mass of the cotton pieces slows down the movement and the speed of movement. This, in turn, has a positive effect on the ginning process. From the graphs of the distance traveled and the speed, it…
In this article, an improved design of the device for trapping heavy impurities in raw cotton material is recommended. Theoretical studies have been conducted on this design and the results have been obtained. As a…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2025-yil arxivi
The article is presented an analysis of the results of the study of the main technological parameters of the existing and improved cotton fiber condenser. The air flow rate and the coefficient of resistance inside the…
Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of…
In the article is presented an analysis of a fiber bottom stripping device in the cotton gin industry that allows increased airflow rate, consumes less air and improves the efficiency of stripping fibers from saw teeth…
In thе glоbаl dеvеlоpmеnt trеnd, spесiаl аttеntiоn is bеing pаid tо thе сrеаtiоn оf а simplifiеd nеw соnstruсtiоn оf thе wоrking bоdiеs оf tесhnоlоgiсаl mасhinеs, thе dеvеlоpmеnt оf struсturаl, kinеmаtiс аnd dуnаmiс…
This article is discussed the equation of motion of cotton fiber in the condenser, describing the motion of a fiber in a condenser, equations can be used that take into account the forces acting on the fiber, as well as…
Based on the experiments carried out with a change in the number of sides of the grate in the area of pulling raw cotton, it has a sinusoidal shape relative to the faces of the grate, with different angles of location…
This article examines compression as a meaning-oriented strategy in sign language translation and interpreting. Compression is understood not as arbitrary shortening, but as the selective reformulation of a source…
This study investigates the impact of Edge Computing on bandwidth utilization in Internet of Things (IoT)–driven Nigerian telecom networks. The rapid growth of IoT devices has significantly increased data traffic…
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
This article addresses the problem of improving an adaptive traffic signal control algorithm at urban intersections by taking into account the dynamic characteristics of traffic flow. Fixed-time control under conditions…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…