The review of scientific research works devoted to the improvement of the linterization process is devoted to the analytical analysis of literary sources and the current state of technology and technology of the linterization process. This article analyzes the results of research conducted to improve the designs of linter machines.
| Mualliflar | Azambayev, Mukhammadjon |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 271-276 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i1.749 |
DOI: 10.61151/stjniet.v10i1.749 · Maqolaning asl sahifasi
linter, lint, technology, quality, seeds, adaptations, analysis, result, laboratory research
The increase in the mass of the cotton pieces slows down the movement and the speed of movement. This, in turn, has a positive effect on the ginning process. From the graphs of the distance traveled and the speed, it…
The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum…
In this article, an improved design of the device for trapping heavy impurities in raw cotton material is recommended. Theoretical studies have been conducted on this design and the results have been obtained. As a…
Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of…
Increasing production capacity in the cotton primary processing industry by energy-efficient methods and the rapid introduction of automation methods in the cotton industry have increased the demand for better process…
This article examines the static analysis of a split-cylinder shaft and the process of calculating its torsion angle along with its strength. Using static analysis, forces, moments, stresses, and deformations acting on…
This article presents the results of an experiment conducted to analyze the movement of cotton seeds under the influence of a screw conveyor. It should be noted that an increase in work productivity leads to an increase…
Abstract. In this article, we will discuss the identification and mechanism of the application of microorganisms to fertilizers in soil processing. This will help to provide microbiological fertilizer research processes…
This article explores the process of continuously discharging heavy mixtures from the working chamber of a sedimentation device. It examines the designs of the relevant mechanisms and highlights their shortcomings. The…
All spinning products, from staple fiber to yarn, are uneven in both linear density and texture. The greater the unevenness, the worse the quality of the product. There are various reasons for unevenness. The impact…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar