The increase in the mass of the cotton pieces slows down the movement and the speed of movement. This, in turn, has a positive effect on the ginning process. From the graphs of the distance traveled and the speed, it can be seen that the ginning process in the first and second pairs of cylinders is more intense than in the third and fourth pairs of cylinders, i.e. 80% of the ginning occurs in the first and second pairs of cylinders. We can observe this situation by the parabolic law of the graph of the dependence of the distance traveled on time, and the graph of the dependence of the speed on time - by the law of the increasing straight line.
| Mualliflar | Abdullayev, Ravshan |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 277-281 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i1.750 |
DOI: 10.61151/stjniet.v10i1.750 · Maqolaning asl sahifasi
raw cotton, pneumatic mechanical gin, theory, dependence, speed, percentage, time, graph, cylinder, movements
In this article, an improved design of the device for trapping heavy impurities in raw cotton material is recommended. Theoretical studies have been conducted on this design and the results have been obtained. As a…
The review of scientific research works devoted to the improvement of the linterization process is devoted to the analytical analysis of literary sources and the current state of technology and technology of the…
Increasing production capacity in the cotton primary processing industry by energy-efficient methods and the rapid introduction of automation methods in the cotton industry have increased the demand for better process…
The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum…
This article presents the results of an experiment conducted to analyze the movement of cotton seeds under the influence of a screw conveyor. It should be noted that an increase in work productivity leads to an increase…
Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of…
This article explores the process of continuously discharging heavy mixtures from the working chamber of a sedimentation device. It examines the designs of the relevant mechanisms and highlights their shortcomings. The…
This article examines the static analysis of a split-cylinder shaft and the process of calculating its torsion angle along with its strength. Using static analysis, forces, moments, stresses, and deformations acting on…
This article presents information on the physicochemical properties of the selected raw materials based on local materials and the technology for obtaining an organomineral modifier from it. To modify road bitumens and…
Abstract. In this article, we will discuss the identification and mechanism of the application of microorganisms to fertilizers in soil processing. This will help to provide microbiological fertilizer research processes…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar