This article presents the results of an experiment conducted to analyze the movement of cotton seeds under the influence of a screw conveyor. It should be noted that an increase in work productivity leads to an increase in the pressure force on the cotton seeds on the surface of the screw, which in turn causes seed clogging. Therefore, optimizing work efficiency by selecting the appropriate screw rotational speed based on its angular velocity is of great importance. During the study, it was observed that correctly choosing the screw speed corresponding to different productivity values (Q1, Q2, Q3) helps to reduce seed clogging.
| Mualliflar | Sarbarov, Khusanboy, Jumaniyazov, Kadam |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 302-309 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i1.753 |
DOI: 10.61151/stjniet.v10i1.753 · Maqolaning asl sahifasi
screw conveyor, cotton seed, seed fibers, lint quality
This article explores the process of continuously discharging heavy mixtures from the working chamber of a sedimentation device. It examines the designs of the relevant mechanisms and highlights their shortcomings. The…
Increasing production capacity in the cotton primary processing industry by energy-efficient methods and the rapid introduction of automation methods in the cotton industry have increased the demand for better process…
This article presents information on the physicochemical properties of the selected raw materials based on local materials and the technology for obtaining an organomineral modifier from it. To modify road bitumens and…
In this article, an improved design of the device for trapping heavy impurities in raw cotton material is recommended. Theoretical studies have been conducted on this design and the results have been obtained. As a…
This article highlights that the modification with varying amounts of organomineral modifier primarily improves parameters that lead to an increased service life of road bitumens, as supported by data obtained from…
The increase in the mass of the cotton pieces slows down the movement and the speed of movement. This, in turn, has a positive effect on the ginning process. From the graphs of the distance traveled and the speed, it…
The high material and energy consumption of the analyzed fiber separation devices from fibrous waste and the uncertainty of fractionation reduce their efficiency, and the inability to separate fibers simultaneously…
The review of scientific research works devoted to the improvement of the linterization process is devoted to the analytical analysis of literary sources and the current state of technology and technology of the…
This article discusses modifications made to the State Standard 3927-88 footwear template for creating orthopedic footwear for patients with ankle joint injuries. Based on these modifications, an orthopedic footwear…
The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar