All spinning products, from staple fiber to yarn, are uneven in both linear density and texture. The greater the unevenness, the worse the quality of the product. There are various reasons for unevenness. The impact area of unevenness is the contact length of the crushing roller with the surface of the yarn, which consists of cotton fibers of different thickness and unevenness. The design of an improved stretching tool for ring spinning machines is proposed and researched.
| Mualliflar | Dadakhanov, Nurilla, Karimov, Rustamjon |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 189-195 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i1.744 |
DOI: 10.61151/stjniet.v10i1.744 · Maqolaning asl sahifasi
fiber, stretching device, tension cylinder, crushing roller, rubber, double roller, belt, yarn break, unevenness, ring spinning machine
Abstract. In this article, we will discuss the identification and mechanism of the application of microorganisms to fertilizers in soil processing. This will help to provide microbiological fertilizer research processes…
Corrosion occurs as a result of friction between moving parts of machines, which leads to the destruction of surfaces. As a result, the dimensions of parts change and the deviation from the required technical and…
This article examines the static analysis of a split-cylinder shaft and the process of calculating its torsion angle along with its strength. Using static analysis, forces, moments, stresses, and deformations acting on…
The crankshaft group (crankshaft, main and connecting rod bearings) is one of the most critical units of a diesel locomotive, which largely determines its service life, as well as reliability, timing, volume and cost of…
Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of…
The article analyzes the modern range of compression materials, highlighting key factors such as the elasticity, deformation, and abrasion resistance properties of the materials. In the process of designing compression…
The article considers the strength of saw blades for conventional and hexagonal shafts. The maximum stress is determined to be 191 MPa and 193 MPa, the maximum displacement is 0.048 mm and 0.026 mm, the maximum…
The article discusses the results of a refining technology for processing long-stored sunflower oil. After adding a filtering agent in the amount of 0.1-0.3% to the same oil samples, an increase in the oil filtration…
The review of scientific research works devoted to the improvement of the linterization process is devoted to the analytical analysis of literary sources and the current state of technology and technology of the…
The article presents an analysis of the influence of wheat grain storage in open warehouses on the aging process of bakery products. The purpose of the studyduring the post-harvest ripening period of wheat grainohBread…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar