The article discusses the results of a refining technology for processing long-stored sunflower oil. After adding a filtering agent in the amount of 0.1-0.3% to the same oil samples, an increase in the oil filtration rate from 0.42 to 1.63 kg s/m2 was achieved during filtration. Simultaneously, the color of the oil decreased from 14 mgJ to 8 mgJ. It can be observed that the acid value of the oil decreased from 0.17 to 0.15 mg KOH/g, while the yield increased from 98.1% to 99.2%. The results indicate that the developed technology and filtering agent are highly effective in processing oils that have been stored for a long time.
| Mualliflar | Erkayeva, Nodira, Ahmedov, Azimjon |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 58-63 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i1.740 |
DOI: 10.61151/stjniet.v10i1.740 · Maqolaning asl sahifasi
Refining, polished, sunflower, vegetable oils, glycerin, pyrolysis, concentration, filtering agent, acid value
The article analyzes the modern range of compression materials, highlighting key factors such as the elasticity, deformation, and abrasion resistance properties of the materials. In the process of designing compression…
The article presents an analysis of the influence of wheat grain storage in open warehouses on the aging process of bakery products. The purpose of the studyduring the post-harvest ripening period of wheat grainohBread…
The crankshaft group (crankshaft, main and connecting rod bearings) is one of the most critical units of a diesel locomotive, which largely determines its service life, as well as reliability, timing, volume and cost of…
This аrticle рrovides informаtion аbout stаrch contаined in corn, its imрortаnce in food рroduction аnd humаn heаlth, аnd its аррlicаtions in other industries. Аdditionаlly, the stаrch comрosition of two different corn…
Corrosion occurs as a result of friction between moving parts of machines, which leads to the destruction of surfaces. As a result, the dimensions of parts change and the deviation from the required technical and…
The aim of this study is to determine the amygdalin content in peach oil obtained using the pressing method. This information is crucial for evaluating the quality of peach oil and expanding its potential applications…
All spinning products, from staple fiber to yarn, are uneven in both linear density and texture. The greater the unevenness, the worse the quality of the product. There are various reasons for unevenness. The impact…
The article theoretically analyzes the forces affecting the seed flow during transportation of cotton seeds by bucket elevators. It also analyzes the influence of technological parameters on seed damage. The theoretical…
Abstract. In this article, we will discuss the identification and mechanism of the application of microorganisms to fertilizers in soil processing. This will help to provide microbiological fertilizer research processes…
In this article, samples of cotton fibers (selected industrial grades such as S-65-24 I/1, Bukhara-102 I/1, and Andizhan-36 I/1), obtained in the ginning process after the newly created regeneration of cotton linters in…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar