The article presents an analysis of the influence of wheat grain storage in open warehouses on the aging process of bakery products. The purpose of the studyduring the post-harvest ripening period of wheat grainohBread products stored in waste warehousesThe study consists of a comparative analysis of the effect of the “staleness” process. The AP - 4/1 penetrometer method, which characterizes the most widespread physical and mechanical properties, was used to assess the degree of staleness of bread. Closedgrain stored in warehouseThe volume of bread produced from the flour taken from the sample is 30 - 40 cm3, the relative volume is 0.21 - 0.28 g/cm3, the porosity of the kernel is 2 %, and the organoleptic quality of the bread is 3 - 4 points higher than the others, which indicates that storing wheat grain in closed warehouses during the ripening period after harvest is of great technological importance. It was found that the staleness of bread is related to the technological properties of flour. The interaction of starch and protein, which provide the technological properties of flour, reduces the rate of staleness, but is of less importance than starch retrogradation. The interaction of starch and protein, which provide its technological properties, reduces the rate of staleness, but is less important than starch retrogradation.
| Mualliflar | Kanoatov, Xayrullo |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 50-57 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i1.739 |
DOI: 10.61151/stjniet.v10i1.739 · Maqolaning asl sahifasi
wheat, open warehouse, food, aging, bread, deformation, elasticity, kernel, physical mechanics, microflora
The article discusses the results of a refining technology for processing long-stored sunflower oil. After adding a filtering agent in the amount of 0.1-0.3% to the same oil samples, an increase in the oil filtration…
This аrticle рrovides informаtion аbout stаrch contаined in corn, its imрortаnce in food рroduction аnd humаn heаlth, аnd its аррlicаtions in other industries. Аdditionаlly, the stаrch comрosition of two different corn…
The article analyzes the modern range of compression materials, highlighting key factors such as the elasticity, deformation, and abrasion resistance properties of the materials. In the process of designing compression…
The aim of this study is to determine the amygdalin content in peach oil obtained using the pressing method. This information is crucial for evaluating the quality of peach oil and expanding its potential applications…
The crankshaft group (crankshaft, main and connecting rod bearings) is one of the most critical units of a diesel locomotive, which largely determines its service life, as well as reliability, timing, volume and cost of…
The article theoretically analyzes the forces affecting the seed flow during transportation of cotton seeds by bucket elevators. It also analyzes the influence of technological parameters on seed damage. The theoretical…
Corrosion occurs as a result of friction between moving parts of machines, which leads to the destruction of surfaces. As a result, the dimensions of parts change and the deviation from the required technical and…
In this article, samples of cotton fibers (selected industrial grades such as S-65-24 I/1, Bukhara-102 I/1, and Andizhan-36 I/1), obtained in the ginning process after the newly created regeneration of cotton linters in…
All spinning products, from staple fiber to yarn, are uneven in both linear density and texture. The greater the unevenness, the worse the quality of the product. There are various reasons for unevenness. The impact…
In this article, the chemical composition of products obtained by decomposing two differently composed samples of Central Kyzylkum phosphorite using industrial waste sulfuric acid was studied. During the research, the…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar