The article is presented an analysis of the results of the study of the main technological parameters of the existing and improved cotton fiber condenser. The air flow rate and the coefficient of resistance inside the existing and improved condenser are investigated.
| Mualliflar | Mirzaumidov, Asilbek, Ganikhanov, Khusankhon, Mavlyanov , Aybek, Abdusamatov, Alisher |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2024-12-27 |
| Jild | 9 |
| Son | 4 |
| Betlar | 55-59 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v9i4.619 |
DOI: 10.61151/stjniet.v9i4.619 · Maqolaning asl sahifasi
cotton, separation, condenser, main parametrs
This article is discussed the equation of motion of cotton fiber in the condenser, describing the motion of a fiber in a condenser, equations can be used that take into account the forces acting on the fiber, as well as…
Considering the growing demand for vegetable oils today, after the autumn wheat harvest, vacant land areas are being used to grow secondary crops such as sunflower, safflower, sesame, soybean, and other unconventional…
In thе glоbаl dеvеlоpmеnt trеnd, spесiаl аttеntiоn is bеing pаid tо thе сrеаtiоn оf а simplifiеd nеw соnstruсtiоn оf thе wоrking bоdiеs оf tесhnоlоgiсаl mасhinеs, thе dеvеlоpmеnt оf struсturаl, kinеmаtiс аnd dуnаmiс…
In short , experiments have shown the effectiveness of a floating wooden nozzle device compered to exiting deodorizers. As a result of processing cottonseed oil in a new periodic device, various volatile components in…
Based on the experiments carried out with a change in the number of sides of the grate in the area of pulling raw cotton, it has a sinusoidal shape relative to the faces of the grate, with different angles of location…
Abstract. Objective. This article presents an analysis of the flow of cotton in different pneumatic pipes in the pneumatic transport system used in the delivery of cotton to the production workshops located in the…
The article provides information on the theoretical foundations, technological processes and equipment for laser cutting of steel from thin-walled (4-10 mm thick) gears, which of all laser processing technologies has…
Scandium metal is widely used in the production of heat-resistant, corrosion-resistant optical objects, in the production of expensive instruments in industry and medicine. The article is devoted to the detection of…
The results obtained show that increasing the thickness of the outer layer on the surface of the heat exchange pipe, in addition to reducing its heat transfer characteristics, also leads to a sharp increase in the…
This study investigates how yarn sample length affects its mechanical properties, specifically focusing on tensile strength and elongation under break. Using the YG026T tensile testing machine, yarn samples of varying…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar