Abstract. Objective. This article presents an analysis of the flow of cotton in different pneumatic pipes in the pneumatic transport system used in the delivery of cotton to the production workshops located in the cotton gin. Despite the fact that many scientific researches have been carried out to improve the components of the pneumatic transport system in the process of transporting cotton by pneumatic transport, researches on the pneumatic pipe and its hermeticity and the friction of the pipe with cotton have not been sufficiently studied in order to ensure the efficiency of the cotton raw material transportation in the air flow. In tube mills, seeded cotton hits the working surfaces and the resulting contact stresses are a major cause of seed and fiber damage. Three types of pneumatic elbows are proposed, namely ellipse, parabola and radial elbows. The analysis of cotton movement on three types of corner section is studied. Therefore, the main goal of the article is to study the analysis of cotton flow in pneumatic pipe.
| Mualliflar | Mukhametshina, Elmira |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2024-12-27 |
| Jild | 9 |
| Son | 4 |
| Betlar | 362-368 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v9i4.604 |
DOI: 10.61151/stjniet.v9i4.604 · Maqolaning asl sahifasi
In short , experiments have shown the effectiveness of a floating wooden nozzle device compered to exiting deodorizers. As a result of processing cottonseed oil in a new periodic device, various volatile components in…
Scandium metal is widely used in the production of heat-resistant, corrosion-resistant optical objects, in the production of expensive instruments in industry and medicine. The article is devoted to the detection of…
Considering the growing demand for vegetable oils today, after the autumn wheat harvest, vacant land areas are being used to grow secondary crops such as sunflower, safflower, sesame, soybean, and other unconventional…
This study investigates how yarn sample length affects its mechanical properties, specifically focusing on tensile strength and elongation under break. Using the YG026T tensile testing machine, yarn samples of varying…
The article is presented an analysis of the results of the study of the main technological parameters of the existing and improved cotton fiber condenser. The air flow rate and the coefficient of resistance inside the…
Annotatsiya: Ushbu tadqiqot paxta sanoatida linterlash jarayonini takomillashtirish va energiya samaradorligini oshirishga bag'ishlangan. Tadqiqot lint mahsulotlarini samarali tozalashni kuchaytirish, resurslarni…
This article is discussed the equation of motion of cotton fiber in the condenser, describing the motion of a fiber in a condenser, equations can be used that take into account the forces acting on the fiber, as well as…
In order to effectively dry cotton and clean it from small impurities at the same time, the temperature of the air supplied from the upper side of the cleaner at a deviation angle of 300, 450, 600 degrees to the…
In thе glоbаl dеvеlоpmеnt trеnd, spесiаl аttеntiоn is bеing pаid tо thе сrеаtiоn оf а simplifiеd nеw соnstruсtiоn оf thе wоrking bоdiеs оf tесhnоlоgiсаl mасhinеs, thе dеvеlоpmеnt оf struсturаl, kinеmаtiс аnd dуnаmiс…
This article presents a theoretical study of the coefficients of friction between a rope and a vertical pole when pressure forces are applied from above and below. To facilitate understanding of the mechanical…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar