The results obtained show that increasing the thickness of the outer layer on the surface of the heat exchange pipe, in addition to reducing its heat transfer characteristics, also leads to a sharp increase in the hydraulic resistance in the pipe. This increases energy consumption and negatively affects the operation of the device at full capacity.
| Mualliflar | Ismailov, Mirzaakbar |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2024-12-27 |
| Jild | 9 |
| Son | 4 |
| Betlar | 137-141 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.61151/stjniet.v9i4.624 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v9i4.624 · Maqolaning asl sahifasi
| APA | Ismailov, Mirzaakbar (2024). UDC 621.565.93/95 INFLUENCE OF SURFACE LAYER THICKNESS ON HYDRAULIC RESISTANCE OF THE DEVICE : Purpose of the work: The increase in the thickness of the scale on the inner surfaces of technological pipes reduces the cross-sectional area of the pipe, thereby decreasing its conductivity. As a result, the coefficient of friction in the pipe increases, which in turn leads to an increase in its hydraulic resistance. This causes a sharp increase in the amount of energy consumed, as the required pump power for fluid transportation rises accordingly. Наманган муҳандисликтехнология институти илмийтехника журнали, 9(4), 137-141. https://doi.org/10.61151/stjniet.v9i4.624 |
|---|---|
| GOST (OAK) | Ismailov, Mirzaakbar UDC 621.565.93/95 INFLUENCE OF SURFACE LAYER THICKNESS ON HYDRAULIC RESISTANCE OF THE DEVICE : Purpose of the work: The increase in the thickness of the scale on the inner surfaces of technological pipes reduces the cross-sectional area of the pipe, thereby decreasing its conductivity. As a result, the coefficient of friction in the pipe increases, which in turn leads to an increase in its hydraulic resistance. This causes a sharp increase in the amount of energy consumed, as the required pump power for fluid transportation rises accordingly // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2024. – T. 9, № 4. – P. 137-141. – DOI: 10.61151/stjniet.v9i4.624. |
| MLA | Ismailov, Mirzaakbar. “UDC 621.565.93/95 INFLUENCE OF SURFACE LAYER THICKNESS ON HYDRAULIC RESISTANCE OF THE DEVICE : Purpose of the work: The increase in the thickness of the scale on the inner surfaces of technological pipes reduces the cross-sectional area of the pipe, thereby decreasing its conductivity. As a result, the coefficient of friction in the pipe increases, which in turn leads to an increase in its hydraulic resistance. This causes a sharp increase in the amount of energy consumed, as the required pump power for fluid transportation rises accordingly.” Наманган муҳандисликтехнология институти илмийтехника журнали, 9(4), 137-141, 2024. https://doi.org/10.61151/stjniet.v9i4.624 |
| Chicago | Ismailov, Mirzaakbar. “UDC 621.565.93/95 INFLUENCE OF SURFACE LAYER THICKNESS ON HYDRAULIC RESISTANCE OF THE DEVICE : Purpose of the work: The increase in the thickness of the scale on the inner surfaces of technological pipes reduces the cross-sectional area of the pipe, thereby decreasing its conductivity. As a result, the coefficient of friction in the pipe increases, which in turn leads to an increase in its hydraulic resistance. This causes a sharp increase in the amount of energy consumed, as the required pump power for fluid transportation rises accordingly.” Наманган муҳандисликтехнология институти илмийтехника журнали, 9(4), 137-141 (2024). https://doi.org/10.61151/stjniet.v9i4.624 |
| Harvard | Ismailov, Mirzaakbar (2024) ‘UDC 621.565.93/95 INFLUENCE OF SURFACE LAYER THICKNESS ON HYDRAULIC RESISTANCE OF THE DEVICE : Purpose of the work: The increase in the thickness of the scale on the inner surfaces of technological pipes reduces the cross-sectional area of the pipe, thereby decreasing its conductivity. As a result, the coefficient of friction in the pipe increases, which in turn leads to an increase in its hydraulic resistance. This causes a sharp increase in the amount of energy consumed, as the required pump power for fluid transportation rises accordingly’, Наманган муҳандисликтехнология институти илмийтехника журнали, 9(4), 137-141. https://doi.org/10.61151/stjniet.v9i4.624 |
| BibTeX | @article{ismailovmirzaakbar2024,
title = {UDC 621.565.93/95 INFLUENCE OF SURFACE LAYER THICKNESS ON HYDRAULIC RESISTANCE OF THE DEVICE : Purpose of the work: The increase in the thickness of the scale on the inner surfaces of technological pipes reduces the cross-sectional area of the pipe, thereby decreasing its conductivity. As a result, the coefficient of friction in the pipe increases, which in turn leads to an increase in its hydraulic resistance. This causes a sharp increase in the amount of energy consumed, as the required pump power for fluid transportation rises accordingly},
author = {Ismailov, Mirzaakbar},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2024},
volume = {9},
number = {4},
pages = {137-141},
doi = {10.61151/stjniet.v9i4.624},
url = {https://doi.org/10.61151/stjniet.v9i4.624}
} |
Boshqa maqola uchun iqtibos tayyorlash
The article is presented an analysis of the results of the study of the main technological parameters of the existing and improved cotton fiber condenser. The air flow rate and the coefficient of resistance inside the…
This article is discussed the equation of motion of cotton fiber in the condenser, describing the motion of a fiber in a condenser, equations can be used that take into account the forces acting on the fiber, as well as…
In thе glоbаl dеvеlоpmеnt trеnd, spесiаl аttеntiоn is bеing pаid tо thе сrеаtiоn оf а simplifiеd nеw соnstruсtiоn оf thе wоrking bоdiеs оf tесhnоlоgiсаl mасhinеs, thе dеvеlоpmеnt оf struсturаl, kinеmаtiс аnd dуnаmiс…
Based on the experiments carried out with a change in the number of sides of the grate in the area of pulling raw cotton, it has a sinusoidal shape relative to the faces of the grate, with different angles of location…
The article provides information on the theoretical foundations, technological processes and equipment for laser cutting of steel from thin-walled (4-10 mm thick) gears, which of all laser processing technologies has…
This article discusses the research on physical and mechanical properties of fabrics and clothing proposed for preschool children to prevent contamination. The purpose of poposing special clothing is to consider the…
This pаper hаs studied the оptimаl cоnditiоns fоr the prоductiоn оf technicаl fаbric bаsed оn bаsаlt threаds аnd аlsо lооm. In textile prоductiоn, 11 sаmples оf bаsаlt threаd weаves were оbtаined with а lineаr density…
In this article, the influence of incoming and outgoing factors affecting the process of carding yarns in carding machine, as well as the quality of winding on the weaving bobbin, etc., are analyzed. The selected…
Abstract: Second-order linear equations in the plane, i.e., geometric shapes such as circles, parabolas, and hyperbolas, are of significant importance in mathematical and scientific research, as well as in various other…
The organization and promotion of women's entrepreneurship are the wishes, desires, and main goals of leaders around the world. The reason is that women's entrepreneurship has its rightful place in the socio-economic…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2024-yil arxivi
Purpose of the work. There are various methods for preventing scale formation on heating surfaces and cleaning surfaces from scale: chemical, mechanical, and methods related to the management of hydrodynamic modes…
This article examines compression as a meaning-oriented strategy in sign language translation and interpreting. Compression is understood not as arbitrary shortening, but as the selective reformulation of a source…
This study investigates the impact of Edge Computing on bandwidth utilization in Internet of Things (IoT)–driven Nigerian telecom networks. The rapid growth of IoT devices has significantly increased data traffic…
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
This article addresses the problem of improving an adaptive traffic signal control algorithm at urban intersections by taking into account the dynamic characteristics of traffic flow. Fixed-time control under conditions…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…