The paper presents the results of the study of a series of objects of electrical devices and archaeological heritage by the method of neutron radiography and tomography (VL-10 diode, spark plug, bell, ancient ring, stone). It is shown that the method of neutron radiography and tomography reliably works on samples made of various materials. Neutron radiographic and tomographic studies of the VL-10 diode gave an idea of the internal structure of the diode. Experiments with spark plugs have revealed the causes of its faulty function. According to the tomographic results of the bell, ring and stone, the heterogeneous areas in the internal volume of these objects were revealed. The results obtained are the basis for further research in the field of archaeological heritage and technical devices for special purposes.
| Mualliflar | Tashmetov, M.Yu., Yuldashev, B.S., Adizov, S.M., Ismatov, N.B. |
|---|---|
| Jurnal | O‘zbekiston fizika jurnali |
| Nashr sanasi | 2021-12-27 |
| Jild | 23 |
| Son | 3 |
| Betlar | 63-67 |
| Til | Ingliz |
| DOI | 10.52304/.v23i3.266 |
DOI: 10.52304/.v23i3.266 · Maqolaning asl sahifasi
изображение, сечение, поглощение, рассеяние, устройство с зарядовой связью (ПЗС), сцинтиллятор, поток тепловых и эпитепловых нейтронов, исследовательский ядерный реактор, радиография, томография, нейтрон, image, cross section, absorption, scattering, charge coupled device (CCD), scintillator, thermal and epithermal neutron flux, research nuclear reactor, radiography, tomography, neutron
The method of express-analysis of triethoxysilane and tetraethoxysilane, which are intermediate products of chemical reactions occurring in the framework of the silane technology for the synthesis of polycrystalline…
The effect of ion doping on the secondary emission characteristics of Mo, Pd and Pd-Ba alloy has been investigated. It was found that as a result of doping with low-energy barium ions, an intermetallic compound of the…
The increase in material removal rates and the quality of electrical discharge machining expands the possibilities of full-scale application of dielectric in industry. However, in the existing works, the dependence of…
Highly crystalline Sb2Se3 films from a separate sources of Sb and Se elements at a substrate temperature of 500°С were obtained by chemical molecular beam deposition (CMBD) method. The effect of the Sb/Se composition…
The paper presents the results of research on the development, manufacture, calibration and testing of acoustic emission (AE) system for non-destructive control and monitoring of the states of concrete structures of…
In this work, thin films of Mn4Si7 were grown by the methods of magnetron and laser sputtering of bulk manganese silicide Mn4Si7 on the surface of various substrates (Si, SiO2, sitall, and mica), the optimal modes of…
Recently, we have derived an approximate analytic formula for the ground state energy of (2D) charged anyon gas. This result allows us in the present paper to estimate the exchangecorrelation energy, which is as it is…
We have developed an end-to-end simulation model for the light-emitting diode-pumped solidstate laser using the Monte Carlo photon tracing technique. The model considers complete specifics and spectral characteristics…
A nonadiabatic collective model of nonaxial even-even nuclei with quadrupole and octupole deformations is developed. Transverse quadrupole and octupole deformations are taken into account effectively. And longitudinal…
Using the MOPAC 2016 software package, the vacancy mechanism of ionic conductivity in LaF3 crystals inside their bulk and on the surface is investigated. It is shown that the ionic conductivity over the crystal surface…