The article discusses the results of an experimental study of the primary processing of silkworm cocoons. In the laboratory of the department of Tashkent State Technical University a full-scale test was carried out for the primary processing of silkworm cocoons. Experimental work was carried out to pacify and dry the living cocoons of the silkworm of the duragay cultivar “MusaffoTola” grown during the summer season. Studies were carried out to determine parameters such as temperature and time of the primary processing of the silkworm in 5- fold repetition.The initial moisture content of live silkworm cocoons was 36–40%. According to the results of laboratory - experimental work, the appearance of mold was observed in 25-30% of processed cocoons of the silkworm, at 55-60 °C in 10 days a butterfly formed in 15-20% of the cocoons. The processed cocoons of the silkworm at a temperature of 75-85 °C deteriorated due to the release of liquid.It was revealed during observations that silkworm cocoons processed in the temperature range 65-70 °С using vibration waves were euthanized within 30 minutes and the cocoons were dried to 10-12% humidity within 10 days at a temperature of 38-42 °С. The use of elastic waves in the processing of cocoons proceeded 5-10% lower compared to the processing method using vibrational waves.
| Mualliflar | J Safarov, Shakhnoza Sultanova, D Samandarov |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashr sanasi | 2019-06-11 |
| Jild | 2018 |
| Son | 3 |
| Betlar | 30-36 |
| Til | en |
| DOI | 10.51346/tstu-01.18.2.-77-0010 |
DOI: 10.51346/tstu-01.18.2.-77-0010 · Maqolaning asl sahifasi
A systematic analysis of the technological process of glass melting as an object of automatic control and management has been carried out. As an object of automatic control with distributed parameters, the mathematical…
In article, the solution of problem of the combined use of fuel in operation is considered. It is shown that during the operation of the gasoline automobile engine the requirement to octane number of fuel changes…
The article presents results for the preparation of salts of sulfated amides based on oleic acid and piperidine. The products were synthesized in several steps: the first step of the reaction of oleic acid with…
Non-linear elements are widely used in various automation devices, converting and measuring equipment. They are often presented in the form of diode-resistive circuits. In single-circuit electrical circuits, their…
The article analyzes the operation of the most commonly used dryers for drying sunflowers and other agricultural cereals. Based on the study of drying technology and methods, the advantages and disadvantages of dryers…
Algorithms for increasing the roughness of the procedure for assessing the state vector of control objects to the influence of uncertainty factors are given. Expressions are obtained for extended state vectors and…
the article describes the history of cement use, its initial appearance, cement composition and its physicochemical structure and properties, types of cement and classifications of cement. Cement production processes…
Research of the interaction of rock-cutting tools with rock with various approaches is presented in the article. In contrast to analytical and experimental methods with their limited and costly applicability, it is…
The non-contact measurement method development is caused by the need for precise measurement and elimination of an operator’s errors. The purpose of the atticle research is to develop a reliable small scale prototype…
For increasing accuracy of a measuring device, before carrying out measurement, implementation of graduation, which consists of the establishment of correlation dependence between indications of the measuring device and…
Тошкент давлат техника университети хабарлари — barcha maqolalar