A systematic analysis of the technological process of glass melting as an object of automatic control and management has been carried out. As an object of automatic control with distributed parameters, the mathematical description of the glassmaking furnace operation has been developed (considering the main phenomenological features of the technological mode of glassmaking).In this paper, a mathematical description of charge melting process, additional heating by electric current, bubbling, thermal conductivity and heat fluxes during the processing of molten glass have been generated. Initial conditions and simplifying assumptions have been derived. The model is based on the equations of continuity, momentum and energy, as well as kinetic turbulent energy, dissipation of kinetic turbulent energy. An experiment has been conducted on the proposed in order to check for its adequacy to real glass-making processes.
| Mualliflar | Shuhrat Gulyamov, Azamat Rajabov, U. U. Kholmanov |
|---|---|
| Jurnal | Тошкент давлат техника университети хабарлари |
| Nashr sanasi | 2020-05-10 |
| Jild | 2021 |
| Son | 1 |
| Betlar | 70-74 |
| Til | en |
| DOI | 10.51346/tstu-02.21.1-77-0010 |
DOI: 10.51346/tstu-02.21.1-77-0010 · Maqolaning asl sahifasi
Non-linear elements are widely used in various automation devices, converting and measuring equipment. They are often presented in the form of diode-resistive circuits. In single-circuit electrical circuits, their…
The article discusses the results of an experimental study of the primary processing of silkworm cocoons. In the laboratory of the department of Tashkent State Technical University a full-scale test was carried out for…
The article analyzes the operation of the most commonly used dryers for drying sunflowers and other agricultural cereals. Based on the study of drying technology and methods, the advantages and disadvantages of dryers…
In article, the solution of problem of the combined use of fuel in operation is considered. It is shown that during the operation of the gasoline automobile engine the requirement to octane number of fuel changes…
The article presents results for the preparation of salts of sulfated amides based on oleic acid and piperidine. The products were synthesized in several steps: the first step of the reaction of oleic acid with…
Research of the interaction of rock-cutting tools with rock with various approaches is presented in the article. In contrast to analytical and experimental methods with their limited and costly applicability, it is…
Algorithms for increasing the roughness of the procedure for assessing the state vector of control objects to the influence of uncertainty factors are given. Expressions are obtained for extended state vectors and…
For increasing accuracy of a measuring device, before carrying out measurement, implementation of graduation, which consists of the establishment of correlation dependence between indications of the measuring device and…
the article describes the history of cement use, its initial appearance, cement composition and its physicochemical structure and properties, types of cement and classifications of cement. Cement production processes…
The article discusses the improvement of traction and energy performance main-line locomotives due to more complete use of possibilities of flexible microprocessor control and efficient algorithm that provides reduction…
Тошкент давлат техника университети хабарлари — barcha maqolalar