The research is dedicated to the extraction of silver in powder form from electronic wastes and the selective separation of associated elements through the application of hydrometallurgical methods. The conducted study determined the initial chemical composition of the electrical engineering waste (wt.%): Si – 0.08, Al – 0.133, Fe – 0.021, Mg – 0.614, Cu – 0.005, Zn – 0.02, Ag – 46.9,Zr – 0.557, Ta – 0.004, Pb – 0.003, Mo – 0.002, S – 0.026. A system for the efficient extraction of metals with minimal losses was developed for the selective dissolution of metals such as Cu, Ni, Co, Zn, and Fe from the sorted secondary raw materials, using a 35% HNO₃ solution and lime. It was observed that the precipitation process of metal ions as hydroxides in a nitrate medium strongly depends on pH. The results of the experiments showed that in the extraction of metallic Ag from AgCl precipitate via the cementation method, Fe metal is a more preferable cementing agent compared to Zn metal. It was established that by processing electronic wastes using the cementation method, the silver contained within them can be extracted with a purity of 99.6%.
| Mualliflar | Mastura Kh. ARIPOVA, Umar A. YAKHYAEV, R. V. Mkrtchyan, Shoxrux B. NAIMOV |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2026-03-27 |
| Jild | 2026 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1714 |
DOI: 10.70189/1992-9498.1714 · Maqolaning asl sahifasi · PDF
The aim of research is to develop a new method for synthesis of ultra-dispersed crystalline powders of lanthanide oxides, in particular, erbium oxide doped with ytterbium oxide, intended for making transparent ceramics…
The aim of this work was to obtain solid extractants by impregnating the organic reagent 1-phenyl-1,3-butadione (BNA) onto carriers based on styrene-divinylbenzene copolymers (PAD600, PAD400) as well as activated…
The aim of this study is to investigate microstructural defects in drill bit cutting elements, including milled teeth and WC–Co cemented carbide inserts, to clarify their morphology, chemical–phase characteristics, and…
Since the cement kiln process has various advantages for waste incineration, the waste utilization as alternative fuel has been widely applied in the cement process. For waste utilization in kiln process, it is…
The purpose of the study was to investigate the formation of the crystal structure of hexagonal boron nitride (h-BN) nanoparticles obtained by the chemical-thermal method using two-stage heat treatment. Boric acid and…
A comprehensive physicochemical study of the aqueous “urea – glycine” system was conducted to establish the mechanisms of intermolecular interaction and stability parameters for the development of modified liquid…
A comprehensive physicochemical study of the “urea – DL-alanine – water” system was carried out to determine the nature of the interactions between its components. Methods of isomolar series, X-ray phase analysis…
The aim of the work is to find ways to use cryotic metals that also provide added value to the economy, using the example of tantalum and zirconium. Among the critical metals, there are those that are rarely found in…
The aim of the study is to investigate the regional characteristics of iron and zinc content in wheat and flour produced in Uzbekistan using instrumental neutron activation analysis, and on this basis to provide a…
The aim of study is synthesize mixed oxide composites based on titanium dioxide, iron and molybdenum oxides from industrial waste materials and evaluated for their photocatalytic degradation performance of…