The aim of this study is to investigate microstructural defects in drill bit cutting elements, including milled teeth and WC–Co cemented carbide inserts, to clarify their morphology, chemical–phase characteristics, and potential contribution to manufacturing-related defects. To achieve this goal, the study applied a combined approach based on optical microscopy and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDS). First, the study examined surface and microstructural features, such as pores, depressions, and local heterogeneities formed during manufacturing. Then, it conducted detailed SEM–EDS analyses of selected local regions, including crack initiation sites. As a result, the study revealed that cutting elements from a defective batch exhibit pronounced microstructural and chemical–phase heterogeneity. Moreover, defect regions show local redistribution of the WC carbide phase and the cobalt binder, as well as increased oxygen content, indicating the presence of thin oxide and adsorbed surface layers. Consequently, these microstructural features may act as local stress concentrators and reduce the structural integrity of cutting elements already during manufacturing. The benefits of this study include improved understanding of defect formation mechanisms and guidance for optimizing technological processes in drill bit production.
| Mualliflar | Odiljon Abdurakhmonov, Mastura Kh. ARIPOVA, Orifjon O. KHOMIDOV, Bakhtiyar T. ZAKHIDOV, Amir Abidov |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2026-03-27 |
| Jild | 2026 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1716 |
DOI: 10.70189/1992-9498.1716 · Maqolaning asl sahifasi · PDF
The purpose of the study was to investigate the formation of the crystal structure of hexagonal boron nitride (h-BN) nanoparticles obtained by the chemical-thermal method using two-stage heat treatment. Boric acid and…
The aim of research is to develop a new method for synthesis of ultra-dispersed crystalline powders of lanthanide oxides, in particular, erbium oxide doped with ytterbium oxide, intended for making transparent ceramics…
A comprehensive physicochemical study of the “urea – DL-alanine – water” system was carried out to determine the nature of the interactions between its components. Methods of isomolar series, X-ray phase analysis…
The research is dedicated to the extraction of silver in powder form from electronic wastes and the selective separation of associated elements through the application of hydrometallurgical methods. The conducted study…
The aim of the study is to investigate the regional characteristics of iron and zinc content in wheat and flour produced in Uzbekistan using instrumental neutron activation analysis, and on this basis to provide a…
The aim of this work was to obtain solid extractants by impregnating the organic reagent 1-phenyl-1,3-butadione (BNA) onto carriers based on styrene-divinylbenzene copolymers (PAD600, PAD400) as well as activated…
The aim of this work is to develop a catalytic system for the production of polyisocyanurateurethane foams based on N,N',N"-tris(β-hydroxyethyl)hexahydro-S-triazine (TOEGT)…
Since the cement kiln process has various advantages for waste incineration, the waste utilization as alternative fuel has been widely applied in the cement process. For waste utilization in kiln process, it is…
Including cheese products in daily diet will give tangible results, enriching body with nutrients rich in high-quality proteins. The aim of the research is to create an Italian semi-hard cheese, caciotta, from local…
A comprehensive physicochemical study of the aqueous “urea – glycine” system was conducted to establish the mechanisms of intermolecular interaction and stability parameters for the development of modified liquid…