The aim of research is to develop a new method for synthesis of ultra-dispersed crystalline powders of lanthanide oxides, in particular, erbium oxide doped with ytterbium oxide, intended for making transparent ceramics. The formation of nanostructured powders of the erbium oxide – ytterbium oxide system using deposition and heat treatment processes by co-deposition of salt solutions mixed with ammonium carbonate and hydrogen peroxide complex solution at temperature of 10 °C followed annealing at 100, 650, 900 and 1200°C was studied. Studies of the morphological and structural characteristics of the powders using scanning electron microscopy and X-ray phase analysis showed that the Er2O3–Yb2O3 particles are great extent agglomerated, they have a laminar, plate-like morphology with the laminate thickness of about 50 nm, length of 10–15 μm (650 °С), when sediment is annealed at 900°C, laminar particles split into 30–60 nm diameter fibers, and during subsequent heating the fibers in agglomerates fuse together forming a mesh structure, the size of the annealed particles being 150–200 nm
| Mualliflar | Eygeniy N. PODDENEZHNY, A. A. Boiko, N. E. Drobyshevskaya, V. I. Urbanovich, Ekaterina E TRUSOVA |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2026-03-27 |
| Jild | 2026 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1712 |
DOI: 10.70189/1992-9498.1712 · Maqolaning asl sahifasi · PDF
The aim of this study is to investigate microstructural defects in drill bit cutting elements, including milled teeth and WC–Co cemented carbide inserts, to clarify their morphology, chemical–phase characteristics, and…
The research is dedicated to the extraction of silver in powder form from electronic wastes and the selective separation of associated elements through the application of hydrometallurgical methods. The conducted study…
The purpose of the study was to investigate the formation of the crystal structure of hexagonal boron nitride (h-BN) nanoparticles obtained by the chemical-thermal method using two-stage heat treatment. Boric acid and…
The aim of this work was to obtain solid extractants by impregnating the organic reagent 1-phenyl-1,3-butadione (BNA) onto carriers based on styrene-divinylbenzene copolymers (PAD600, PAD400) as well as activated…
A comprehensive physicochemical study of the “urea – DL-alanine – water” system was carried out to determine the nature of the interactions between its components. Methods of isomolar series, X-ray phase analysis…
Since the cement kiln process has various advantages for waste incineration, the waste utilization as alternative fuel has been widely applied in the cement process. For waste utilization in kiln process, it is…
The aim of the study is to investigate the regional characteristics of iron and zinc content in wheat and flour produced in Uzbekistan using instrumental neutron activation analysis, and on this basis to provide a…
A comprehensive physicochemical study of the aqueous “urea – glycine” system was conducted to establish the mechanisms of intermolecular interaction and stability parameters for the development of modified liquid…
The aim of this work is to develop a catalytic system for the production of polyisocyanurateurethane foams based on N,N',N"-tris(β-hydroxyethyl)hexahydro-S-triazine (TOEGT)…
The aim of the work is to find ways to use cryotic metals that also provide added value to the economy, using the example of tantalum and zirconium. Among the critical metals, there are those that are rarely found in…