This paper discusses the development of a modified, environmentally safe adhesive based on liquid glass (sodium silicate Na₂O·nSiO₂) with enhanced adhesion efficiency to wood. The sodium silicate used fully complies with the requirements of GOST 13078–81 and TU 6-18-003-87, with a silicate modulus of 2.6–2.8 and a solid residue content of 31–33%. An oligomer based on thiourea and glycerol was used as a modifier. The experiments were carried out by mixing the modifier with liquid glass in various mass ratios (5%, 10%, 15%). The experimental results showed that the modification process significantly improved the rheological and mechanical properties of the adhesive. At the optimal 10% modifier content, the adhesion strength increased from 2.28 MPa to 3.15 MPa (an increase of 27.6%), while water resistance rose from 62% to 82%. The viscosity was approximately 230 mPa·s, which fully meets the industrial range specified in GOST 13078–81 (200–250 mPa·s). The resulting modified adhesive does not release formaldehyde, is non-toxic, and environmentally safe, providing high adhesion and water resistance for wood bonding. The obtained results form a scientific and practical basis for expanding the use of modified sodium silicate-based adhesives in woodworking, construction, and furniture industries.
| Mualliflar | Murodov, Doston, Niyozov, Alisher, Akhmedov, Vokhid, Beshimov, Islom, Муродов, Достон Мухсинугли, Ниёзов, Алишер Камилович, Ахмедов, Вохид Низомович, Бешимов, Ислом Акмалжонович, Murodov, Doston Muhsino‘g‘li, Niyozov, Alisher Kamilovich, Axmedov, Voxid Nizomovich, Beshimov, Islom Akmaljonovich |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-12-08 |
| Jild | 3 |
| Son | 4 |
| Betlar | 205-210 |
| Til | Ingliz |
| DOI | 10.70769/3030-3214.srt.3.4.2025.27 |
DOI: 10.70769/3030-3214.srt.3.4.2025.27 · Maqolaning asl sahifasi
wood adhesive, sodium silicate, bonding strength, curing technology, adhesion, eco-friendly glue, modifier, water resistance, деревянный клей, натрий силикат, прочность сцепления, технология отверждения, адгезия, экологический клей, модификатор, водостойкость, yog‘och elim, natriy silikat, yopishish mustahkamligi, qotish texnologiyasi, adgeziya, ekologik yelim, modifikator, suvga chidamlik
The article is devoted to the analysis of working with the software product TIM CREDO Mine Surveying using data from the Mikashevichi granite quarry. The study examines the process of data processing using point clouds…
This article presents the results of laboratory and industrial studies on the flotation beneficiation of polymetallic ores from the Khandiza deposit. The main focus is on the influence of reagent regimes on the quality…
This article presents a comprehensive study of the geological structure, mineralization, material composition, and formation factors of promising kaolin deposits (Zakhkuduk, Alyans, Altintau) in the Kyzylkum region. The…
Robot manipulators encounter significant control challenges stemming from nonlinear dynamics, parametric uncertainties, and external disturbances. While Boolean logic-based controllers operate through precise binary…
This article focuses on the selective alkaline leaching of gold-bearing tetrahedrite concentrates in a solution containing sodium sulfide and sodium hydroxide. This selective leaching process is accompanied by the…
This article presents the results of research on the influence of external factors on the quality of processed materials from the “Qizilqum” basalt deposits. During the experiments, mechanical cleaning and assessment of…
It is known that the presence of chloride and other salt compounds in the extraction of minerals from the surface and underground, along with the abrasive effect on metal structures, also causes corrosion. In this…
This article details the construction principles of contactless ferromagnetic converters designed for measuring and controlling direct currents used in high-voltage electrical installations, their operating principle…
The article examines the principles of flotation of copper-molybdenum ores, the role of the main groups of reagents, and the possibilities of using “local” (locally available, import-substituting, or derived from…
The Divalkak field discussed in the article is located in the Ispanly-Chandyr uplift. The productive section is represented by Jurassic carbonate and Lower to Middle Jurassic terrigenous deposits. Geological modeling of…