This article presents the experimentally obtained values of the adsorption isotherm of ammonia molecules on zeolitite СаА (MSS-622) at a temperature of 303 K. The isotherm was measured using a DAC-1-1A microcalorimeter connected to a universal high-vacuum device. The relationship between the amount of ammonia adsorption and its energetic characteristics on СаА (MSS-622) zeolite was established. Additionally, the sorption mechanism from the initial adsorption stage to the experimental range and the filling behavior of ammonia molecules in the zeolite's volume were determined. Under experimental conditions, the adsorption capacity of this zeolite for ammonia was found to be 10.2 mmol/g per gram of zeolite. It was determined that 43% of the total adsorption occurs at an equilibrium pressure of 0.33 torr, 53% at 1.4 torr, 71% at 25 torr, 80% at 200 torr, 98% at 476 torr, and 100% at 614 torr. The adsorption isotherm was reinterpreted using the three-term equation of the volumetric filling theory of micropores (VMOT), and the theoretically calculated values were shown to fully match the experimental data. It was proven that ammonia molecules initially form tetrameric ion-molecular complexes 4NH3:Na+ with sodium cations and subsequently trimeric complexes 3NH3:Ca2+ with calcium cations in the first coordination sphere of the zeolite.
| Mualliflar | Ergashev , Oybek, Bazarbaev, Muratali, Juraeva, Ziyoda, Bakhronov, Khayot, Kokharov, Mirzokhid, Mamadaliyev, Utkurbek |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-03-31 |
| Jild | 10 |
| Son | 1 |
| Betlar | 84-92 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i1.729 |
DOI: 10.61151/stjniet.v10i1.729 · Maqolaning asl sahifasi
adsorption, enthalpy, free energy, isotherm, pressure, relative pressure, microcalorimeter, ammonia
This article presents the experimentally obtained values of differential enthalpy of ammonia adsorption at 303 K in Ca4Na4A (Horst-50/50) zeolite of the LTA type. The enthalpy values were measured using a modified…
Plants from which oil is extracted include cotton, soybeans, sunflowers, peanuts, safflower, corn, olives, and sesame. Currently, the most common method for industrially extracting cottonseed oil is by pressing…
The synthesis, characterization, and physicochemical characteristics of water-soluble methylated chitosan derivatives are the main topics of this research. There are several uses for trimethylchitosan and…
This article discusses the current state of the global textile industry, including the volume of textile product manufacturing in developed countries, the size of the European textile market, and issues such as…
In this study, AKF-78 grade Angren kaolin was used to synthesize KA zeolite. The obtained metakaolin and KCl were mixed in a 1:1 molar ratio. The prepared mixture was treated with a 2M NaOH solution and heated in an…
In light industry enterprises, electricity consumption and its quality indicators directly affect production efficiency and product quality. This article proposes a new methodology for analyzing and calculating the…
This study investigates the physicochemical properties of phenol-formaldehyde resin (PFR) and polystyrene (PS) waste as promising secondary resources for the production of carbon-based adsorbents. A comparative analysis…
This article presents the classification of level measuring instruments and level sensors used as their sensitive elements. It describes the operating principles of electromechanical, electrical, optoelectronic, radio…
In this article, the chemical composition of products obtained by decomposing two differently composed samples of Central Kyzylkum phosphorite using industrial waste sulfuric acid was studied. During the research, the…
This article presents ideas on the identification of the central ion that forms the complex in complex compounds of nickel and cobalt with a coordination number of six.
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar