The results of studies of the effect of fillers from branch kaolins of various grades on the performance properties of composite polymer materials are presented. Optimum amounts of fillers in the composite polymer material were determined.
| Mualliflar | Umida Ziyamukhamedova, Lutfillo Yuldoshaliyevich BAKIROV, Bekzodbek Ahmadjonovich SOBIROV, Zayniddin Nasritdinovich MUXITDINOV |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2019-10-18 |
| Jild | 2018 |
| Son | 2 |
| Til | en |
| DOI | 10.70189/1992-9498.1025 |
DOI: 10.70189/1992-9498.1025 · Maqolaning asl sahifasi
The advantages of synthesis of complex oxide compounds by solar energy, the possibility of obtaining highly textured nano materials are shown. The development of heliomaterial science, aimed at the synthesis of new…
The purpose of the study is to obtain superconducting phases with Ts ≥ 260 K. The advanced “Solar Fast Alloys Quenching-T” technology obtained nanoscale precursors and ceramics of nominal composition Bi1.7Pb0.3 Sr2…
The aim of the study was the regeneration of used oils. The change in the conditions for the regeneration of used engine oil as a result of adsorptive cleaning with alkaline earth clay from the Navbakhor deposit has…
The purpose of the work is to study the technological features of the deodorization of local soybean oil. Deodorization of soybean oil was carried out in laboratory and pilot plants, to analyze the composition of the…
The purpose of this research was to determine the optimal technological parameters for the purification of extraction phosphoric acid based on phosphorites of Central Kyzylkum from fluorine by precipitation with sodium…
The results of research on the use and return technogenic microsilica into the process of producing silicon metal and ferrosilicon are presented. The chemical composition and granulometric structure, physical and…
Loss on ignition (LOI) of cement, raw materials and raw mixes in cement industry is specified as the weight loss at 900~1000 oC and 15~30 minutes in the standards of each region (GOST, ISO, ASTM, JIS, KS) in the world…
The aim of the work is dedicated isolation of anthocyanins by ethanol from herbal plant of Occimum basilicum L. Lamiaceae basis. The were studied influencing of temperature, concentration of ethanol to isolation of…
The aim of this study is to investigate the adsorption kinetics of Cu(II) and Ni(II) ions from aqueous solutions using an adsorbent obtained by treating rice husk with a solution of monoethanolamine. The experiments…
The purpose of the study is to change the properties of water in order to achieve the optimum impact on wheat grain in preparation for variety milling. The results of influence on the properties of drinking water by…