The aim of the study is to develop the composition of sulfur polymer concrete (SPB) based on the waste "cake" from the production of sulfuric acid from sulfur dioxide, steppe quartz sand, as well as the pyrolysis residue of polymer production. Some identified features of solid-phase processes controlled by the chemical interaction of the SPB charge components with liquid (molten) sulfur are presented, as well as the results of scientific studies of factors affecting the quality of the SPB samples.
| Mualliflar | Durdymurad GADAMOV, Umida ZIYAMUKHAMEDOVA, Meretmuhammet HUDAYBERDIYEV |
|---|---|
| Jurnal | Kimyo va kimyo texnologiyasi |
| Nashr sanasi | 2024-04-12 |
| Jild | 2023 |
| Son | 1 |
| Til | en |
| DOI | 10.70189/1992-9498.1575 |
DOI: 10.70189/1992-9498.1575 · Maqolaning asl sahifasi
The aim of the study is to obtain a composition of emulsifiers from local raw materials for the production of margarine. The article presents the results of the influence of the composition of the resulting emulsifiers…
The effect of the flux density of concentrated solar radiation on the microstructure, degree of homogeneity, and charge state of glass ions obtained by quenching fused pyroxene rock in a solar furnace has been studied…
The aim of this work is to study the areas of glass formation and metastable liquation of the pseudo-ternary system (MgO·Al2O3)-B2O3-SiO2, and study of the crystallization process of glasses of cordierite composition…
The aim of this work was to develop a technology for obtaining bacterial exopolysaccharides. The problem was solved by using the bacterial strain Halovibrio variabilis UzAS3 as a polysaccharide producer. The optimal…
The effect of hydrothermal treatment on the strength of the wheat grain shell before the first torn process is investigated. It was found that the anatomical parts of wheat grains grown in arid climatic conditions are…
It is established that in the process of grinding the kernel of cotton seeds, a partial destruction of globules and spheroids of oil occurs before rolling them. At the same time, the greatest damage is observed during…
The purpose of this work is the synthesis of Fe3BO6 nanoparticles for use as the main component in the chemical method for obtaining nanostructured Nd-Fe-B alloys. Amorphous Fe3BO6 nanoparticles prepared by chemical…
The purpose of this work is the preparation of keratin-containing protein compounds from poultry processing waste by hydrolysis with hydrochloric acid, including treatment of the protein with 5% H2O2. The process of…
Creating dietary margarines using biologically valuable substances is the purpose of the work. According to the results of the experiments, it was found that the use of soybean oil, edible vegetable phospholipids and a…
The influence of the glass and basalt fibers on the thermal properties of polypropylene was studied. It is estimated the effect type of concentration of fillers on the thermal properties of base polypropylene.