A comparative thermal analysis was conducted on three industrial samples of low-molecular-weight polyethylene (LMWPE)—a by-product of polyethylene production—with the aim of determining optimal conditions for carbonization and subsequent activation. The study employed TGA/DSC methods (Ar, 10 °C/min) and laboratory-scale carbonization in a flow-through argon reactor, with gas sampling at specific temperature “windows” followed by GC analysis (TCD + FID). The results indicate that melting occurs in the range of approximately 30–150 °C with less than 1% mass loss; thermal degradation begins at 300–400 °C, with major decomposition occurring between 420–520 °C. The residual mass at 1000 °C was approximately 33% (LMWPE-1), 38% (LMWPE-2), and 53% (LMWPE-3), indicating differences in molecular architecture and suggesting LMWPE-3 as the preferred precursor in terms of carbon yield. Gas evolution trends showed a transition from C₃–C₁₇ olefins/paraffins (300–520 °C) to dominant H₂ and CH₄ evolution at higher temperatures, accompanied by increased aromaticity of the solid residue. It is recommended to limit the upper carbonization temperature to ~500 °C to avoid melting and coalescence, and to employ the 750–820 °C range as the optimal “window” for high-temperature treatment relevant to subsequent alkaline activation.
| Mualliflar | Ochilov, Golibjon, Abdumalikov , Abdulaziz, Ummatov, Obidjon, Mamajonov, Bakhodirjon, Esonkulova, Nazirakhon |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2025-09-30 |
| Jild | 10 |
| Son | 3 |
| Betlar | 145-152 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i3.868 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v10i3.868 · Maqolaning asl sahifasi
low-molecular-weight polyethylene (LMWPE), pyrolysis, TGA/DSC, carbonization, gas-phase products, carbon residue, activated carbons
| APA | Ochilov, Golibjon, Abdumalikov , Abdulaziz, Ummatov, Obidjon, Mamajonov, Bakhodirjon, & Esonkulova, Nazirakhon (2025). THERMAL TREATMENT OF VARIOUS SAMPLES OF LOW-MOLECULAR-WEIGHT POLYETHYLENE – A BY-PRODUCT OF POLYETHYLENE PRODUCTION. Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 145-152. https://doi.org/10.61151/stjniet.v10i3.868 |
|---|---|
| GOST (OAK) | Ochilov, Golibjon va b. THERMAL TREATMENT OF VARIOUS SAMPLES OF LOW-MOLECULAR-WEIGHT POLYETHYLENE – A BY-PRODUCT OF POLYETHYLENE PRODUCTION // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2025. – T. 10, № 3. – P. 145-152. – DOI: 10.61151/stjniet.v10i3.868. |
| MLA | Ochilov, Golibjon, Abdumalikov , Abdulaziz, Ummatov, Obidjon, Mamajonov, Bakhodirjon, and Esonkulova, Nazirakhon. “THERMAL TREATMENT OF VARIOUS SAMPLES OF LOW-MOLECULAR-WEIGHT POLYETHYLENE – A BY-PRODUCT OF POLYETHYLENE PRODUCTION.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 145-152, 2025. https://doi.org/10.61151/stjniet.v10i3.868 |
| Chicago | Ochilov, Golibjon, Abdumalikov , Abdulaziz, Ummatov, Obidjon, Mamajonov, Bakhodirjon, and Esonkulova, Nazirakhon. “THERMAL TREATMENT OF VARIOUS SAMPLES OF LOW-MOLECULAR-WEIGHT POLYETHYLENE – A BY-PRODUCT OF POLYETHYLENE PRODUCTION.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 145-152 (2025). https://doi.org/10.61151/stjniet.v10i3.868 |
| Harvard | Ochilov, Golibjon, Abdumalikov , Abdulaziz, Ummatov, Obidjon, Mamajonov, Bakhodirjon, and Esonkulova, Nazirakhon (2025) ‘THERMAL TREATMENT OF VARIOUS SAMPLES OF LOW-MOLECULAR-WEIGHT POLYETHYLENE – A BY-PRODUCT OF POLYETHYLENE PRODUCTION’, Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 145-152. https://doi.org/10.61151/stjniet.v10i3.868 |
| BibTeX | @article{ochilovgolibjon2025,
title = {THERMAL TREATMENT OF VARIOUS SAMPLES OF LOW-MOLECULAR-WEIGHT POLYETHYLENE – A BY-PRODUCT OF POLYETHYLENE PRODUCTION},
author = {Ochilov, Golibjon and Abdumalikov , Abdulaziz and Ummatov, Obidjon and Mamajonov, Bakhodirjon and Esonkulova, Nazirakhon},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2025},
volume = {10},
number = {3},
pages = {145-152},
doi = {10.61151/stjniet.v10i3.868},
url = {https://doi.org/10.61151/stjniet.v10i3.868}
} |
Boshqa maqola uchun iqtibos tayyorlash
The main stages of the convective drying process, the effectiveness of the method and the possibilities of energy savings of pumpkin polyz products are analyzed. Opinions have also been expressed on the application of…
The article discusses the indicators affecting the quality of soft drinks, namely appearance, transparency, color, aroma, taste, and the amount of sediment on the quality of the product. Methods for determining the…
The article presents the results of determining the modes of bitumen movement at various temperatures, the results of reducing the viscosity of construction bitumen grade BNSHK-1 depending on the process temperature…
The article examines modern methods of intensifying heat exchange in plate heat exchangers by changing the geometry of channels. The effectiveness of corrugated, chevron, and zigzag structures in reducing flow…
This article presents the results of obtaining an adsorbent based on carbon-containing soot waste through chemical activation using hydrochloric acid and sodium hydroxide. As a result, improvements were achieved in the…
In this study, the energetics of adsorption of water molecules on modified (enriched and activated) Dehkanabad bentonite were studied in depth. Based on experimental data, adsorption isotherms and differential heats of…
This article investigates the effectiveness of perlite as a filtering agent for the removal of waxy substances from sunflower oil during the winterization process. Sunflower oil tends to become cloudy at low…
The study explores the influence of fibrous raw materials, refining processes, and adhesive substances on the development of strength properties in paper and cardboard products. Special attention is given to the role of…
In this study, to conserve valuable cotton cellulose, the paper pulp was composed of light industrial cocooning waste from our Republic (specifically, the mat and fiber produced during cocooning at the Margulon…
The interaction of boric acid with potassium nitrate, the main component of NPK fertilizers, was studied in 0.01 M dilute solutions using the isomolar sequence method. To determine the possible direction of the reaction…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2025-yil arxivi
The article clarifies the physicochemical properties of adsorbents activated from Logon bentonite under various thermal and chemical conditions. It has been established that the desorption lines in the LBK and LBI…
This study investigates the adsorption properties of modified adsorbents based on bentonite and gossypol resin for the removal of methylene blue (MB) from wastewater. The effects of temperature and concentration on the…
Maqolada ikkilamchi homashyolar asosida uglerodli adsorbentlar olish va ularning fizik-kimyoviy xususiyatlari oʻrganilgan. Uglerodli adsorbentlarni olishda qoʻllanilishi mumkin boʻlgan tabiiy koʻmirlar, bogʻlovchi…