The article presents the results of a study to determine the elementary composition of technical water formed by the gas processing plant. Some defined elements from the composition of process technical water include: Al, As, Ba, Bi, Ca, Cd, Co, Tl, Cr, Cu, Fe, In, K, Li, Mg, Zn, Mn, Mo, Na, Ni, Pb, Sb, Sr. Determination of the elementary composition of technical water is carried out by using the device ICPE-9000 Shimadzu. Moreover, the results of reducing the hardness of technical water are also presented and the most suitable reagent is determined. In order to reduce the hardness of technical water, reagents Ca(OH)2, Na(PO4)3, Na3PO4, Al2(SO4)3, Sulfonyl, Na(PO3)n, H2O, NaF, Al2(SO4)3, 18H2O, were used in the experiments.
| Mualliflar | Khurmamatov, A |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2023-09-30 |
| Jild | 8 |
| Son | 3 |
| Betlar | 97-103 |
| Til | Ingliz |
technical water, reagent, elementary composition, purification, mechanical impurities
This work analyzed the effect on the mechanical and environmental properties of composites based on recycled compact discs (CDs) and digital optical discs (DVDs) based on plastic polycarbonate waste and on the basis of…
The article describes the device of continuous drying of fruits and vegetables and the process of its operation. The drying devices currently used in industry and the processes and disadvantages of their operation are…
In this article, calculation of IR spectra of experimental polymer materials after corona discharge, chain length, intensity of IR spectroscopic absorption fields of oriented polymers, polarization and effect of chain…
The article presents the results of the research conducted on the application of the improved cotton regenerator to the Independence cotton cleaning technology. In the studies, the length uniformity index of cotton…
The article is devoted to the complete coverage of information about the composition of a new glue with bactericidal properties used in the manufacture of corrugated cardboard products. The main goal of this article is…
The fiber heating temperature was studied during the drying of raw cotton selection S-6524 with a humidity of 10.5% and 15.2% in a 2SB-10 drying drum at temperatures of 100 0C, 150 0C and 200 0C with a capacity of 7…
The article carried out a comparative analysis of the physicochemical parameters of triticale grains in comparison with grains of wheat and rye. To analyze the physicochemical parameters of grain samples, the standards…
The aim of research is studying the mechanism of deformation of knitwear under the application of an external load is considered as a process of violation of the internal balance of the system of loops using the…
In the processes of technology in the processing of leather raw materials, the shoe upper hinge is used to confirm the micropore, mesopore, porous radius and porosity indicators, and changes in the physical and chemical…
To develop innovative methods of cleaning natural and associated gas from sulfur compounds. Studying the positive and negative aspects of using physical, chemical and combined methods in cleaning natural and associated…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar