This work analyzed the effect on the mechanical and environmental properties of composites based on recycled compact discs (CDs) and digital optical discs (DVDs) based on plastic polycarbonate waste and on the basis of gypsum raw materials. Fifteen mixtures containing different weight percentages of plastic aggregate with two different granulometries were produced. In each case, the strength properties (flexural and compressive) and density of the new composites were tested. In addition, scanning electron microscopy (SEM) and X-ray computed tomography (XCT) were conducted to find out the internal structure and porosity of the new composites. The results show that in some cases it is possible to obtain lighter and more economical materials with better mechanical properties than the reference material (gypsum). A density reduction of 9.89% was achieved for mixtures with 60% plastic waste. These properties make composites suitable for use in industrial sectors from new products.
| Mualliflar | Nuritdinov, Abdullazizbek, Kamalov, Akmalxon, Abdulalimov, Obidjon, To`raxonov, Ravshanbek |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2023-09-30 |
| Jild | 8 |
| Son | 3 |
| Betlar | 104-109 |
| Til | Ingliz |
recycled gypsum, plaster of paris, plastic waste, mechanical properties, SEM, granulometry, polycarbonate
In this article, calculation of IR spectra of experimental polymer materials after corona discharge, chain length, intensity of IR spectroscopic absorption fields of oriented polymers, polarization and effect of chain…
The article presents the results of a study to determine the elementary composition of technical water formed by the gas processing plant. Some defined elements from the composition of process technical water include…
The article is devoted to the complete coverage of information about the composition of a new glue with bactericidal properties used in the manufacture of corrugated cardboard products. The main goal of this article is…
The article describes the device of continuous drying of fruits and vegetables and the process of its operation. The drying devices currently used in industry and the processes and disadvantages of their operation are…
The article carried out a comparative analysis of the physicochemical parameters of triticale grains in comparison with grains of wheat and rye. To analyze the physicochemical parameters of grain samples, the standards…
The article presents the results of the research conducted on the application of the improved cotton regenerator to the Independence cotton cleaning technology. In the studies, the length uniformity index of cotton…
To develop innovative methods of cleaning natural and associated gas from sulfur compounds. Studying the positive and negative aspects of using physical, chemical and combined methods in cleaning natural and associated…
The fiber heating temperature was studied during the drying of raw cotton selection S-6524 with a humidity of 10.5% and 15.2% in a 2SB-10 drying drum at temperatures of 100 0C, 150 0C and 200 0C with a capacity of 7…
The article reflects the results of a study of changes in air speed and aerodynamic force on the cross section of the pipe during the transportation of cotton by pneumatic transport. It contains conclusions and…
The aim of research is studying the mechanism of deformation of knitwear under the application of an external load is considered as a process of violation of the internal balance of the system of loops using the…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar