This work presents the results of an experimental study on a two-stage installation designed for deep purification of dust-laden air containing fibrous and fine-dispersed mineral particles. The experimental system consists of a cyclone equipped with a string-type coagulator and a scrubber with a moving (floating) packing. The effects of dust–air flow velocity, structural parameters, and operating conditions on air purification efficiency and hydraulic resistance were investigated. The results showed that as the inlet flow velocity increases from 12 to 17 m/s, the purification efficiency rises up to 99.9%, while further increasing the velocity to 20 m/s causes a decrease in efficiency due to the breakdown of coagulated dust aggregates. The optimal air velocity for the two-stage system was found to be 17 m/s, corresponding to a total hydraulic resistance of 820 Pa. Fractional efficiency analysis revealed that particles larger than 60 µm were removed with almost complete efficiency (99.98%), whereas for particles smaller than 5 µm, efficiency reached 86.6%. These findings confirm that the developed two-stage system ensures high purification efficiency while maintaining acceptable energy consumption and compliance with sanitary standards.
| Mualliflar | Khurmamatov, Abdugafor, Alimardonov, Khusniddin, Akhmedova, Kumush |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-12-30 |
| Jild | 10 |
| Son | 4 |
| Betlar | 65-72 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i4.912 |
DOI: 10.61151/stjniet.v10i4.912 · Maqolaning asl sahifasi
air purification, cyclone, scrubber, floating packing, coagulation, hydraulic resistance, fine dust, fibrous particles
The paper presents the results of separation of mechanical impurities of technical waters. With the help of the proposed effective technology and with the use of an improved filter, it is possible to purify technical…
This paper presents a methodology for determining the tribotechnical properties of structural materials interacting with raw cotton under frictional conditions. The main objective of the study is to evaluate the…
In this study, secondary polyethylene terephthalate (PET), an industrial waste, and monoethanolamine were treated in a ratio of 1:2.5 without the presence of a catalyst. The aminolysis process was carried out stepwise…
The textile and clothing and knitwear industry occupies a leading place in the world. The production of textile and garment and knitwear products is increasing day by day, the reason for this is the increase in the…
Experiments were conducted to determine the effect of using newly designed convex-surfaced saw ribs in a cotton cleaning machine for removing large impurities, comparing their cleaning efficiency with that of standard…
In the design of knitted garments, twisting (torsion)—a tendency of the fabric edges to curl or distort—is considered one of the most important physical-mechanical properties. This phenomenon arises from the structural…
The article examines the advantages of drying Rosa canina fruits using a drying technology with 3-stage vibrating conveyors. According to the research results, the use of 3-stage vibrating conveyors in the convective…
The article discusses theoretical studies including the investigation of the fiber separation process from the seed during ginning depending on the density of the seed and fiber and the change in the inclination angle…
This article presents an analysis of the organoleptic and physicochemical properties of sauce–paste semi-finished products developed for fish canned products. The study focuses on current and highly relevant issues…
The article describes the results of an analytical and experimental study of the existing disadvantages and problems of the aerodynamic systems of removing and transporting fluff from the Sawtooth in 5LP linters, which…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar