This paper presents a methodology for determining the tribotechnical properties of structural materials interacting with raw cotton under frictional conditions. The main objective of the study is to evaluate the frictional characteristics of materials used for the working elements of cotton-processing machinery in order to reduce mechanical damage to cotton fibers. The experiments were carried out using a disk-type tribometer under a nominal pressure of 0.04 MPa, a sliding speed of 6 m/s, and a test duration of 1 hour. Steel, aluminum, and polymer-coated samples based on ED-16 were subjected to comparative testing. The results showed that polymer coatings cause 1.5–2 times less damage to raw cotton compared to steel and aluminum surfaces. This effect is explained by the lower hardness and higher elasticity of polymer materials. The obtained results confirm that the tribotechnical properties of structural materials play a significant role in preserving the quality of raw cotton and can be effectively applied in the development of working elements for cotton-cleaning, cotton-harvesting, and textile machinery.
| Mualliflar | Turaboyev, Gulomjon |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2025-12-30 |
| Jild | 10 |
| Son | 4 |
| Betlar | 54-57 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i4.911 |
DOI: 10.61151/stjniet.v10i4.911 · Maqolaning asl sahifasi
raw cotton, tribotechnical properties, friction, polymer coatings, mechanical damage, cotton-processing machinery
This work presents the results of an experimental study on a two-stage installation designed for deep purification of dust-laden air containing fibrous and fine-dispersed mineral particles. The experimental system…
The textile and clothing and knitwear industry occupies a leading place in the world. The production of textile and garment and knitwear products is increasing day by day, the reason for this is the increase in the…
The paper presents the results of separation of mechanical impurities of technical waters. With the help of the proposed effective technology and with the use of an improved filter, it is possible to purify technical…
In the design of knitted garments, twisting (torsion)—a tendency of the fabric edges to curl or distort—is considered one of the most important physical-mechanical properties. This phenomenon arises from the structural…
In this study, secondary polyethylene terephthalate (PET), an industrial waste, and monoethanolamine were treated in a ratio of 1:2.5 without the presence of a catalyst. The aminolysis process was carried out stepwise…
The article discusses theoretical studies including the investigation of the fiber separation process from the seed during ginning depending on the density of the seed and fiber and the change in the inclination angle…
Experiments were conducted to determine the effect of using newly designed convex-surfaced saw ribs in a cotton cleaning machine for removing large impurities, comparing their cleaning efficiency with that of standard…
The article describes the results of an analytical and experimental study of the existing disadvantages and problems of the aerodynamic systems of removing and transporting fluff from the Sawtooth in 5LP linters, which…
Maqolada donni sovuq holda konditsionerlash usuli o'rganiladi. O'tkazilgan tadqiqotda donni intensiv namlash, ya'ni sovuq holda konditsionerlash usullaridan foydalangan holda qurilma ishlab chiqildi. Olingan ma'lumotlar…
The article examines the advantages of drying Rosa canina fruits using a drying technology with 3-stage vibrating conveyors. According to the research results, the use of 3-stage vibrating conveyors in the convective…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar