The article discusses the design of the saw cylinder of the genie DP-130 family. Ways to improve performance have been studied. A shaft with a hexagonal cross-section was considered as an energy- and resource-saving design.
| Mualliflar | Abduvaxidov, Mutaxxirxon |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2023-09-30 |
| Jild | 8 |
| Son | 3 |
| Betlar | 161-163 |
| Til | Ingliz |
To describe mathematical models that calculate geo-technological indicators necessary for the management of physical-chemical hydrodynamic processes. Analyzing methods for solving these models and developing analytical…
One of the major challenges faced when designing garments in garment dyeing is the significant shrinkage of cotton fabric in both length and width during the dyeing process. In previous researches, shrinkage values of…
Cleaning the fiber from impurities in textile enterprises consists in increasing the cleaning efficiency of the fiber due to the installation of a special pipe in the front part of the cleaning machine.
Objective. It is a study of the influence of the use of various fuels on engine performance and the performance properties of oils. Methods. During the research, the laws of lubrication theory, methods of planning…
Abstract. Objective. To carry out research on the production technology of powder materials used in the production of products with additive technology, to apply the obtained results for the purposes of powder…
The article presents the results of an analysis of the appearance of burrs on the teeth of a saw cutting machine, the value of which is in The article presents the results of an analysis of the appearance of burrs on…
To theoretically substantiate the interaction of zinc sulfate with monoammonium phosphate, an isomolar series was used, based on the ratio of the components ZnSO4 and NH4H2PO4.
Abstract: Objective: to identify problems and give recommendations on the processes of cleaning cotton at the cotton gins of the region, taking into account the increase in demand and the need for the use of cotton…
The study utilizes the Katalco-58 industrial catalyst from Johnson Matthey Catalysts, composed of 13 wt.% Cu/27 wt.% ZnO/60 wt.% Al2O3, in the dehydration of methanol to DME. The catalytic activity of the samples was…
Objective. Taking into account the large number of cotton fibers grown in Uzbekistan, producing quality products from local raw materials is an urgent task. The goal of the article is to produce a cotton fiber fabric…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar