To describe mathematical models that calculate geo-technological indicators necessary for the management of physical-chemical hydrodynamic processes. Analyzing methods for solving these models and developing analytical solution methods.
| Mualliflar | Ismanova, Klara |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2023-12-30 |
| Jild | 8 |
| Son | 4 |
| Betlar | 197-205 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v8i4.218 |
DOI: 10.61151/stjniet.v8i4.218 · Maqolaning asl sahifasi
physical-chemical processes, useful component, mathematical model, concentration quantity, optimization factors, Fourier integral, formula of cosines, analytical solutions, numerical-approximate methods
Cleaning the fiber from impurities in textile enterprises consists in increasing the cleaning efficiency of the fiber due to the installation of a special pipe in the front part of the cleaning machine.
The article discusses the design of the saw cylinder of the genie DP-130 family. Ways to improve performance have been studied. A shaft with a hexagonal cross-section was considered as an energy- and resource-saving…
Abstract. Objective. To carry out research on the production technology of powder materials used in the production of products with additive technology, to apply the obtained results for the purposes of powder…
One of the major challenges faced when designing garments in garment dyeing is the significant shrinkage of cotton fabric in both length and width during the dyeing process. In previous researches, shrinkage values of…
To theoretically substantiate the interaction of zinc sulfate with monoammonium phosphate, an isomolar series was used, based on the ratio of the components ZnSO4 and NH4H2PO4.
Objective. It is a study of the influence of the use of various fuels on engine performance and the performance properties of oils. Methods. During the research, the laws of lubrication theory, methods of planning…
The study utilizes the Katalco-58 industrial catalyst from Johnson Matthey Catalysts, composed of 13 wt.% Cu/27 wt.% ZnO/60 wt.% Al2O3, in the dehydration of methanol to DME. The catalytic activity of the samples was…
The article presents the results of an analysis of the appearance of burrs on the teeth of a saw cutting machine, the value of which is in The article presents the results of an analysis of the appearance of burrs on…
The rheological characteristics (density, viscosity) of acidic and ammoniated phosphate slurries obtained from the decomposition of Khodjakul phosphate powder with extraction phosphoric acid (EPA) in a wide range of…
Abstract: Objective: to identify problems and give recommendations on the processes of cleaning cotton at the cotton gins of the region, taking into account the increase in demand and the need for the use of cotton…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar