Theoretical analysis and experimental studies have been conducted on the automatic control process for installation errors of body parts using the IGM-2K measuring head on numerically controlled machines. The results of the experimental study are presented, detailing the actual values of control errors and the time costs associated with automatic approach methods using the IGM-2K for checking the base points of body part surfaces on these machines. An algorithm for selecting the first approach speed F1 for IGM-2K has been developed. In accordance with the developed algorithm, the optimal values F1 are determined for a different range of installation errors of body parts. An algorithm has been developed for selecting the IGM-2K approach method depending on the range of installation errors for body parts. A graph of the time costs of the measuring head approach methods depending on the range of installation errors for body parts is provided. In accordance with the developed algorithm, the optimal values of F1 have been determined for different ranges of installation errors for body parts. Thus, for the installation error range ∆i=0÷2 mm F1=300 mm/min, for ∆i=0÷5 mm, the optimal value is F1=400 mm/min. Analysis of the research results showed that the choice of the first approach speed using this algorithm for the IGM-2K reduces the control cycle time compared to the BV 4272-04 measuring head and the “Renishaw” measuring head by 1.5÷2 times, depending on the range of installation error of the body part on machines with a numerical control device.
| Mualliflar | A.M. Abduvaliev |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashriyot | Тошкент давлат техника университети, «Ўзқурилишматериаллар» ДАК, «Ўзкимёсаноат» ДАК, «Совпластитал» ҚҚ, Ўзбекистон Интеллектуал мулк агентлиги |
| ISSN | 2181-1105, 1815-4840 |
| Nashr sanasi | 2024-10-24 |
| Jild | 2024 |
| Son | 5 |
| Betlar | 100-106 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.59048/2181-1105.1636 |
| Indeksga qo‘shilgan | 2026-09-02 |
DOI: 10.59048/2181-1105.1636 · Maqolaning asl sahifasi
| APA | A.M. Abduvaliev (2024). SELECTING THE FIRST APPROACH SPEED OF THE IGM-2K MEASURING HEAD WHEN CONTROLLING THE INSTALLATION ERROR OF HOUSING PARTS ON TNCD MACHINES. Кимёвий технология. Назорат ва бошқарув, 2024(5), 100-106. https://doi.org/10.59048/2181-1105.1636 |
|---|---|
| GOST (OAK) | A.M. Abduvaliev SELECTING THE FIRST APPROACH SPEED OF THE IGM-2K MEASURING HEAD WHEN CONTROLLING THE INSTALLATION ERROR OF HOUSING PARTS ON TNCD MACHINES // Кимёвий технология. Назорат ва бошқарув. – 2024. – T. 2024, № 5. – P. 100-106. – DOI: 10.59048/2181-1105.1636. |
| MLA | A.M. Abduvaliev. “SELECTING THE FIRST APPROACH SPEED OF THE IGM-2K MEASURING HEAD WHEN CONTROLLING THE INSTALLATION ERROR OF HOUSING PARTS ON TNCD MACHINES.” Кимёвий технология. Назорат ва бошқарув, 2024(5), 100-106, 2024. https://doi.org/10.59048/2181-1105.1636 |
| Chicago | A.M. Abduvaliev. “SELECTING THE FIRST APPROACH SPEED OF THE IGM-2K MEASURING HEAD WHEN CONTROLLING THE INSTALLATION ERROR OF HOUSING PARTS ON TNCD MACHINES.” Кимёвий технология. Назорат ва бошқарув, 2024(5), 100-106 (2024). https://doi.org/10.59048/2181-1105.1636 |
| Harvard | A.M. Abduvaliev (2024) ‘SELECTING THE FIRST APPROACH SPEED OF THE IGM-2K MEASURING HEAD WHEN CONTROLLING THE INSTALLATION ERROR OF HOUSING PARTS ON TNCD MACHINES’, Кимёвий технология. Назорат ва бошқарув, 2024(5), 100-106. https://doi.org/10.59048/2181-1105.1636 |
| BibTeX | @article{amabduvaliev2024,
title = {SELECTING THE FIRST APPROACH SPEED OF THE IGM-2K MEASURING HEAD WHEN CONTROLLING THE INSTALLATION ERROR OF HOUSING PARTS ON TNCD MACHINES},
author = {A.M. Abduvaliev},
journal = {Кимёвий технология. Назорат ва бошқарув},
year = {2024},
volume = {2024},
number = {5},
pages = {100-106},
doi = {10.59048/2181-1105.1636},
url = {https://doi.org/10.59048/2181-1105.1636}
} |
Boshqa maqola uchun iqtibos tayyorlash
The paper presents the results of an experimental study on the intensification of convective heat exchange in tubular-lattice packings of rectification columns. Currently, in various sectors of the country's economy…
This paper presents a new method that can be applied in the field of metrology to determine and change the intercalibration periodicity during the operation of measuring instruments (certified standard chemical samples)…
Developed fuzzy models and optimization of a deethanizer distillation column in the Aspen HYSYS software environment. This article presents the results of studies related to fuzzy modeling of distillation columns using…
A numerical model of gas flow in a direct-flow cyclone of two different configurations is presented. The main task of the simulation was to determine the gas velocity field in the apparatus and analyze the presence of a…
This paper presents a comparative analysis of existing 'NOT' logic elements (LE) based on MOSFET transistors and their analogs using bipolar transistors. It was found that the 'NOT' LE circuit implemented with n-MOS…
This article discusses the optimization of the design and optical parameters of an activated sludge concentration measuring device through experimental studies in laboratory conditions in order to improve the…
In this article, you can see the models of modern greenhouses, reducing water consumption, parameters and some factors to be considered for automated greenhouses, proposed models for organizing greenhouses, and the…
This article explores the economic significance of standardization within the industrial sector, highlighting its role in enhancing competitiveness and innovation in the Republic of Uzbekistan. Standardization…
Nowadays, the advancement of science and technology has led to more complex production processes and management systems, requiring in-depth research into their structure and interconnections. A key method for such…
The paper presents the results of the obtained research, taking into account the dynamics of the thermal process in order to determine the parameters of the equipment and the choice of the optimal law of temperature…
Кимёвий технология. Назорат ва бошқарув — barcha maqolalar · 2024-yil arxivi
Post-flight maintenance is a crucial process that ensures an aircraft remains in optimal condition and safe for the next flight. For the Airbus A320, a highly popular narrow-body jet, post-flight maintenance involves a…
This article examines algorithms for the movement of measuring heads (MH) on controlled component surfaces on numerically controlled (NC) machines. Algorithms for surface inspection are developed based on the…
This article examines compression as a meaning-oriented strategy in sign language translation and interpreting. Compression is understood not as arbitrary shortening, but as the selective reformulation of a source…
This study investigates the impact of Edge Computing on bandwidth utilization in Internet of Things (IoT)–driven Nigerian telecom networks. The rapid growth of IoT devices has significantly increased data traffic…
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
This article addresses the problem of improving an adaptive traffic signal control algorithm at urban intersections by taking into account the dynamic characteristics of traffic flow. Fixed-time control under conditions…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…