The paper presents the results of an experimental study on the intensification of convective heat exchange in tubular-lattice packings of rectification columns. Currently, in various sectors of the country's economy, either plate or packed rectification columns are mainly used, and combined devices are not used. Therefore, in this paper, studies were conducted on the intensification of the rectification process by using tubes with spiral turbulators with their staggered and corridor placement in the tube sheet. Analysis of the experimental data showed that the pitch of the turbulators s/deb significantly affects the heat exchange process. At the pitch of the spiral turbulators s/deb=14.2 and the Reynolds criterion number Rev=38, the heat transfer coefficient is K=212, and at s/deb=9.32, the coefficient is K=255, and at s/deb=5.11, respectively, K=300 W/m2×K. It was experimentally established that with a staggered arrangement of pipes on a tube sheet, the intensification of heat transfer relative to the corridor arrangement of pipes is 8-26%, depending on the pitch of the turbulators. From the experimental data, it is evident that the degree of intensification of tubular-lattice packing made of pipes with spiral pipes was ~1,5-1,6, relative to a package of smooth-tube packing.
| Mualliflar | Ainagul Abdiualievna Nurillaeva, Elbek Tulkinovich Mavlonov, Khabibulla Sadullaevich Nurmukhamedov, Nazora Sharofovna Khudoiberdieva |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashr sanasi | 2024-10-24 |
| Jild | 2024 |
| Son | 5 |
| Betlar | 62-67 |
| Til | en |
| DOI | 10.59048/2181-1105.1631 |
DOI: 10.59048/2181-1105.1631 · Maqolaning asl sahifasi
This paper presents a new method that can be applied in the field of metrology to determine and change the intercalibration periodicity during the operation of measuring instruments (certified standard chemical samples)…
The formulation of the problem of optimal control of gas-burning furnace operation in the glass industry is carried out. The main stages of solving this problem, starting from mathematical modeling of the investigated…
Developed fuzzy models and optimization of a deethanizer distillation column in the Aspen HYSYS software environment. This article presents the results of studies related to fuzzy modeling of distillation columns using…
This scientific work analyzes the research on data collection and transmission technologies for automatic control of high-frequency ozonators in water disinfection. The purpose of the study is to improve disinfection…
A numerical model of gas flow in a direct-flow cyclone of two different configurations is presented. The main task of the simulation was to determine the gas velocity field in the apparatus and analyze the presence of a…
This paper presents a major challenge in fault diagnosis for electronic computing equipment is developing an object model tailored to support diagnostic tasks. Effective fault localization requires establishing a link…
This paper presents a comparative analysis of existing 'NOT' logic elements (LE) based on MOSFET transistors and their analogs using bipolar transistors. It was found that the 'NOT' LE circuit implemented with n-MOS…
The paper presents methods and algorithms for automatic control based on predictive models of dynamic objects in continuous and semi-continuous industrial production. The approach under consideration allows further…
Theoretical analysis and experimental studies have been conducted on the automatic control process for installation errors of body parts using the IGM-2K measuring head on numerically controlled machines. The results of…
The article is devoted to the solution of the scientific issue of decision-making support for the prevention and elimination of the consequences of emergency situations. The relevance of this issue is related to the…