This article examines algorithms for the movement of measuring heads (MH) on controlled component surfaces on numerically controlled (NC) machines. Algorithms for surface inspection are developed based on the installation error range of the components. An algorithm for moving the measuring head in hole inspection, accounting for component installation error, is presented. The inspection time is determined to identify optimal movement algorithms for measuring heads on controlled surfaces. A method for inspecting component planes is presented, along with formulas for calculating the inspection time of both plane and hole measurements, considering installation error. Algorithms for plane inspection based on various installation error ranges are developed. A formula for hole inspection time is also provided. Experimental studies conducted on a test stand for inspecting reference surfaces using measuring heads on an NC machine are included. Algorithms for hole inspection under various installation error ranges are developed and for hole inspection with installation error correction using combined measuring heads. An algorithm for hole inspection and a scheme for selecting the number of probes - k and the minimum and maximum sizes of combined MH based on the installation error range are developed.
| Mualliflar | A.M. Abduvaliev, Sh.B. Mamirov |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashr sanasi | 2024-10-24 |
| Jild | 2024 |
| Son | 5 |
| Betlar | 127-132 |
| Til | en |
| DOI | 10.59048/2181-1105.1641 |
DOI: 10.59048/2181-1105.1641 · Maqolaning asl sahifasi
This study analyzes methods of fault-tolerant control and automatic fault diagnosis in servo systems considering dynamic redundancy. The application of diagnostic and fault-tolerant control methods is critical for…
The article is devoted to the method of selecting elements and designing intelligent optoelectronic displacement transducers. It is proposed that morphological tables be used to expand the principles of building…
When developing design monitoring systems based on the acoustic emission method, the dynamic properties of the entire AE signal path, which are related to fast processes, are important. The corresponding mathematical…
Rectification processes, which are considered complex technological processes, and the development of structures of intelligent systems for controling the work of rectification devices and columns, which serve to…
The system of monitoring and control of thermal regime in gas furnaces is considered, the description of which includes temperature sensors, control systems and optimization algorithms. Attention is paid to monitoring…
The paper discusses and analyzes the application of fuzzy logic methods for self-calibration of measuring devices. In particular, the principles of constructing measurement devices based on fuzzy logic, based on…
The issues of constructing an adaptive joint estimation of the state and parameters of dynamic control objects using the Maine estimator are considered. There are various variants of the extended filter, and a variant…
Methods and algorithms for the synthesis of regulators for nonlinear dynamic systems are given, based on various approaches to the formation of a control device. We considered synthesis methods based on phase space…
This article is dedicated to the research and application of the One-Class Support Vector Machines method for detecting anomalies in network traffic. It examines the problems of detecting anomalies in network traffic…
This paper considers approximation methods for solving optimization problems while discussing the possibility to reduce the large amount of calculations. Hence, the approximation range is selected in accordance with the…