The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which there is a sharp decrease in the voltage on the device with simultaneous internal current lacing, and the device fails. To solve the problem of secondary breakdown, schemes have been proposed that operate stably at reverse voltage values 4-5 times higher than usual and at power dissipation 2-3 times higher than the maximum allowable power for an individual device. The problem is proposed to be solved by using composite transistors. This is the most optimal way, since passive elements are not used. The article proposes and investigates power amplifiers based on the use of composite bipolar transistors operating in the injection-voltaic mode. A method of active emitter self-stabilization of power amplifiers based on composite transistors with the same band gap is proposed and theoretically substantiated, which makes it possible to reduce the total coefficient of non-linear distortion and the instability of the quiescent current of power amplifiers depending on the supply voltage and temperature.
| Mualliflar | Nodira Batirdjanovna Alimova |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashr sanasi | 2023-04-29 |
| Jild | 2023 |
| Son | 2 |
| Betlar | 49-56 |
| Til | en |
| DOI | 10.59048/2181-1105.1454 |
DOI: 10.59048/2181-1105.1454 · Maqolaning asl sahifasi · PDF
The modern development of new technologies, in particular, the intensive use of programmable logic integrated circuits in digital information processing tasks, allows for algorithmically and programmatically solving…
This article analyzes the process of metrological control of gas analyzers and metrological requirements for them. The current state of the standards used in the state metrological control of gas analyzers and the…
Based on the modern representation of the water softening process by the ion exchange method, modeling was carried out, an algorithm was developed and the ionite regeneration process was calculated in a water softening…
Based on the synergetic approach, the article solves the problem of analyzing a chemical reactor as a control object and formulates recommendations on the structural and topological synthesis of various control system…
The problem of placing poles in linear multidimensional systems using a feedback matrix of unlimited rank is considered. The effect of output feedback of indefinite rank of the characteristic polynomial of a system with…
The article substantiates the needs to increase the level of automation of methods and geodetic support of geometric parameters during the construction of buildings and structures. In particular, the method of alignment…
This article discusses the models of the group structure in the investigation of information security incidents, contradictions in the investigation of information security incidents, methods for assessing information…
The article develops mathematical models of the magnetic chain of new differential type angular displacement transformer converter with a variable active area of the movable core, in which the width of the movable…
The article examines the magnetic circuits of both existing and developed differential transformer displacement sensors for large linear displacements. These circuits are characterized by a specific distribution…
Hydraulic mechanisms that actuate flat gates, widely used in hydraulic structures, are studied as hydraulic actuators of the system. Their static mathematical models are developed using an integrated methodology with a…