The article substantiates the needs to increase the level of automation of methods and geodetic support of geometric parameters during the construction of buildings and structures. In particular, the method of alignment measurements is considered. This is widely used in determining deviations from the straightness and alignment of the installation of elements in engineering building structures, including hydraulic structures, as well as in the control of process equipment installations, rolling mills, conveyor lines, crane tracks, when monitoring precipitation. and deformations of techno objects. One of the methods of alignment measurements with the use of a visual-optical device – aliniometer and a sighting mark is considered; shortcomings of the instruments used, which are the reason for the low efficiency and effectiveness of the process of alignment measurements, are revealed. A comparative analysis of existing methods and means of gate measurements using various designs of instruments and electro-optical devices was carried out, as a result of which a design of a target mark and an electronic block diagram were developed using a liquid crystal indicator and mobile phones as a means of remote control and transmission of information in the measurement process. , which differs from analogues in small weight and size parameters, low energy consumption and cost, high efficiency and ease of use.
| Mualliflar | Nodirbek Rustambekovich Yusupbekov, Zahidov Muratovich Nematjon |
|---|---|
| Jurnal | Кимёвий технология. Назорат ва бошқарув |
| Nashr sanasi | 2023-04-29 |
| Jild | 2023 |
| Son | 2 |
| Betlar | 22-29 |
| Til | en |
| DOI | 10.59048/2181-1105.1457 |
DOI: 10.59048/2181-1105.1457 · Maqolaning asl sahifasi · PDF
Based on the synergetic approach, the article solves the problem of analyzing a chemical reactor as a control object and formulates recommendations on the structural and topological synthesis of various control system…
The article develops mathematical models of the magnetic chain of new differential type angular displacement transformer converter with a variable active area of the movable core, in which the width of the movable…
This article analyzes the process of metrological control of gas analyzers and metrological requirements for them. The current state of the standards used in the state metrological control of gas analyzers and the…
Hydraulic mechanisms that actuate flat gates, widely used in hydraulic structures, are studied as hydraulic actuators of the system. Their static mathematical models are developed using an integrated methodology with a…
The problem of high-current radio engineering devices is related to the fact that the use of high-power transistors and other semiconductor devices is limited by such a phenomenon as a secondary breakdown, in which…
On the basis of material and heat balances, taking into account the initial and boundary conditions, a mathematical model of the process of measuring the transformation of liquid and gaseous technological media by the…
The modern development of new technologies, in particular, the intensive use of programmable logic integrated circuits in digital information processing tasks, allows for algorithmically and programmatically solving…
The article discusses the creation of algorithmic structures and the development of digital control systems for electric drives of mine-lifting machines, provides some concepts for creating digital control systems using…
Based on the modern representation of the water softening process by the ion exchange method, modeling was carried out, an algorithm was developed and the ionite regeneration process was calculated in a water softening…
It is proposed to include virtual instrumental quality analyzers of potash fertilizers in the composition of the advanced (advanced) management system. The structure of the virtual analyzer is substantiated using…