The energy efficiency of reciprocating compressors largely depends on the initial thermodynamic state of the air entering the compressor, particularly its temperature. A high temperature of the suction air leads to a decrease in gas density, which increases the work required during the compression process and consequently results in higher electrical energy consumption. The aim of this study is to develop a multi-stage suction air cooling system for reciprocating compressors and to evaluate its effect on thermodynamic and aerodynamic characteristics using computational fluid dynamics methods. In the proposed technical solution, the suction air is cooled before entering the compressor through a series of sequentially arranged multi-stage tubular heat exchangers. The research was carried out using SolidWorks Flow Simulation software, where temperature and pressure fields were modeled. The simulation results showed that the temperature of the suction air decreases from 40 °C to 7–8 °C. This increases air density, reduces the work required for compression, and improves the energy efficiency of the compressor. At the same time, the pressure loss in the device ranges between 14–26 Pa, which indicates minimal hydraulic resistance. The obtained results confirm that the proposed multi-stage cooling system increases the volumetric efficiency of the compressor, reduces electrical energy consumption, and improves overall energy efficiency. The proposed technical solution can be applied in Reciprocating compressor, suction air, multi-stage cooling, heat exchanger, computational fluid dynamics, energy efficiency, volumetric efficiency, pressure loss.
| Mualliflar | Yuldashev, Elmurod Umaraliyevich, Jurayev, Shakhzod Numonugli, Юлдашев, Элмурод Умаралиевич, Джураев, Шахзод Нумонугли, Yuldashev, Elmurod Umaraliyevich, Jo‘rayev, Shaxzod Numono‘g‘li |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2026-04-03 |
| Jild | 4 |
| Son | 1 |
| Betlar | 104-109 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.4.1.2026.36 |
DOI: 10.70769/3030-3214.srt.4.1.2026.36 · Maqolaning asl sahifasi
Reciprocating compressor, suction air, multi-stage cooling, heat exchanger, energy efficiency, pressure loss, Поршневой компрессор, всасываемый воздух, многоступенчатое охлаждение, теплообменник, моделирование гидродинамики жидкости, энергетическая эффективность, потери давления, Porshenli kompressor, so‘riluvchi havo, issiqlik almashtirgich, Suyuqliklar dinamikasini modellashtirish, hajmiy unumdorlik, bosim yo‘qotish
In this study, the process of hydro abrasive wear of pump flow surfaces was analyzed based on theoretical and experimental approaches. Pumps are widely used in ore mining operations to lift mine water containing solid…
The paper addresses modern technological approaches aimed at improving blasthole utilization and preventing the formation of unbroken bottom zones (“cups”) during drilling and blasting operations in underground mine…
The article presents the results of the analysis of the age and spatial relationships of local structures of the third rank formed at various stages of the Mesozoic-Cenozoic history, the relationship between the spatial…
This article analyzes technological solutions for maximizing the efficient extraction of valuable components from ore based on a study of the beneficiability of gold-bearing ores at the Kauldy deposit using various…
This paper analyzes the mean daily variations of the Earth’s magnetic field recorded at the Yangibazar Geophysical Research Observatory during periods of strong magnetic storms (Kp ≥ 7, Dst ≤ −100 nT). The study…
This article presents the results of experimental studies on the chemical and rational analyses of the material composition of gold-bearing ores from the Kauldy deposit, as well as on the cyanidation of initial…
In this article, methods for absorbing natural gases from acidic components are used, while the efficiency of flow direction in nozzle absorbers largely depends on the shape of the nozzle used. For this purpose, various…
This article describes a multi-objective optimization model developed to determine the reconstruction parameters of earthen irrigation canals. The model incorporates hydraulic flow calculations using the Chezy–Manning…
It was studied that the increase in the process of absorption purification of natural gas from acidic components is closely related to hydrodynamic, geometric, and physicochemical factors, as well as the location…
The article provides an overview of the ten most significant transport technologies that will determine global trends in 2025 and are of practical value for the development of Uzbekistan. It analyses the prospects for…