This article describes a multi-objective optimization model developed to determine the reconstruction parameters of earthen irrigation canals. The model incorporates hydraulic flow calculations using the Chezy–Manning equation, sediment transport calculations using the Engelund–Hansen sediment transport capacity formula, and filtration calculations using Pavlovskiy’s filtration formula. The model also calculates reconstruction and operation costs for combinations generated using the NSGA-II algorithm, based on current price levels. By applying the NSGA-II algorithm in the Python environment, the model generates parameter combinations and selects the most optimal parameters based on results that provide the minimum total cost. The model was tested in a case study of the Amu-Bukhara Machine Canal. The results made it possible to determine the optimal balance between reconstruction and operation costs.
| Mualliflar | Khazratov, Alisher Normurodovich, Sobirov, Feruz Khorievich, Хазратов, Алишер Нормуродович, Собиров, Феруз Хориевич, Xazratov, Alisher Normurodovich, Sobirov, Feruz Choriyevich |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2026-04-01 |
| Jild | 4 |
| Son | 1 |
| Betlar | 246-252 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.4.1.2026.32 |
DOI: 10.70769/3030-3214.srt.4.1.2026.32 · Maqolaning asl sahifasi
reconstruction of earthen canals, multi-objective optimization, NSGA-II algorithm, sediment transport capacity of flow, flow variability, reconstruction and operational costs, реконструкция грунтовых каналов, многокритериальная оптимизация, алгоритм NSGA-II, транспортирующая способность потока, изменчивость потока, затраты на реконструкцию и эксплуатацию, grunt o‘zanli kanallarni rekonstruksiya qilish, ko‘p mezonli optimallashtirish, NSGA-II algoritmi, oqimning tashish qobiliyati, oqimning o‘zgaruvchanligi, rekonstruksiya va ekspluatatsiya xarajatlari
This article presents the results of experimental studies on the chemical and rational analyses of the material composition of gold-bearing ores from the Kauldy deposit, as well as on the cyanidation of initial…
The article provides an overview of the ten most significant transport technologies that will determine global trends in 2025 and are of practical value for the development of Uzbekistan. It analyses the prospects for…
This article analyzes technological solutions for maximizing the efficient extraction of valuable components from ore based on a study of the beneficiability of gold-bearing ores at the Kauldy deposit using various…
To date, extensive field observations and laboratory experiments on the formation and movement of bedforms in channels with alluvial beds have been conducted in various scientific centers worldwide. These studies have…
The paper addresses modern technological approaches aimed at improving blasthole utilization and preventing the formation of unbroken bottom zones (“cups”) during drilling and blasting operations in underground mine…
This study investigates the physicochemical properties of a flame-retardant material based on polyvinyl chloride (PVC) modified with stabilizers and fillers. Composite materials consisting of PVC, dioctyl phthalate…
The energy efficiency of reciprocating compressors largely depends on the initial thermodynamic state of the air entering the compressor, particularly its temperature. A high temperature of the suction air leads to a…
In this study, organic additives that increase the octane number of oxygen-containing gasoline were synthesized using local raw materials such as isoamyl alcohol, phthalic anhydride, glycerin, and acetic acid. The…
In this study, the process of hydro abrasive wear of pump flow surfaces was analyzed based on theoretical and experimental approaches. Pumps are widely used in ore mining operations to lift mine water containing solid…
This article investigates the process of extracting cellulose from the stem of a non-traditional raw material source - wild barley (Hordeum murinum) - and examines the properties of the resulting product. The structural…