The scientific principles and practical significance of preheating (preheat) and post-weld heat treatment (PWHT – Post Weld Heat Treatment) technologies in the welding of materials have been analyzed. The primary purpose of the preheating process is to limit the formation of undesirable structures in the heat-affected zone, prevent hydrogen-induced cracking, and reduce thermal stresses. Post-weld heat treatment serves to relieve internal stresses in the weld, stabilize the microstructure, and improve mechanical properties. The research results indicate that the scientifically grounded application of these methods significantly enhances the strength and service life of welded joints. In addition, the practical effectiveness of these methods in the energy, oil and gas, mechanical engineering, and other industrial sectors has been highlighted.
| Mualliflar | Azimov, Salohiddin Turamuradovich, Rakhimov, Ganisher Bakhtiyorovich, Buronov, Firdavsi Eshburiyevich, Азимов, Салохиддин Турамурадович, Рахимов, Ганишер Бахтиёрович, Буронов, Фирдавси Эшбуриевич, Azimov, Salohiddin Turamuradovich, Raximov, G‘anisher Baxtiyorovich, Buronov, Firdavsiy Eshburiyevich |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-11-18 |
| Jild | 3 |
| Son | 4 |
| Betlar | 135-140 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.4.2025.14 |
DOI: 10.70769/3030-3214.srt.3.4.2025.14 · Maqolaning asl sahifasi
welding, preheating, post-weld heat treatment (PWHT), heat-affected zone (HAZ), microstructural stability, mechanical properties, Сварка, предварительный подогрев, термообработка после сварки, зона термического влияния (ЗТВ), микроструктурная стабильность, механические свойства, payvandlash, preheat, PWHT, issiqlik ta’siridagi zona, mikrostrukturaviy barqarorlik, mexanik xossalar
The sequence and criteria for selecting the optimal absorbent or their combined absorbents for selective purification of natural gas from acidic components are considered, as well as the problems of absorption…
High-Temperature Hydrogen Attack (HTHA) is a critical degradation phenomenon that significantly reduces the service life of carbon and low-alloy steels widely used in the oil and gas, chemical, and power industries…
The article examines the scientific basis of corrosion of pipelines and tanks used for storing products in the oil and gas industry, types of corrosive environments and their negative impact, as well as the reasons for…
This article presents the results of research conducted to determine the optimal conditions for the flotation beneficiation of alunite ores of the Gushsai deposit. During the research, the influence of the degree of…
This article presents an in-depth study of the mineralogical composition of saponite samples obtained from the Uchtut deposit in the Navbahor district of Navoi region, Uzbekistan. The research was conducted using…
This article describes the scientific basis of the need to create a technology for obtaining fire-resistant organic materials based on polyvinyl chloride and mineral fillers for today's modern construction industry, as…
This paper presents an integrated methodology for the quantitative assessment of Oil Displacement Efficiency by Water (ODEW) in fractured-porous carbonate reservoirs using a multivariate statistical analysis. We examine…
5-Hydroxymethylfurfural (5-HMF) is recognized as a key platform molecule in the bioeconomy, serving as a precursor for the production of biofuels (2,5-dimethylfuran, 5-ethoxymethylfurfuryl ether), biopolymers…
The article examines the issue of intensifying gas extraction from water-flooded reservoirs. The wells of the Shimoliy Berdakh field are taken as an example, where almost all 48 wells in the operational fund produce…
This article analyzes the processing stages of scheelite concentrates, including acid decomposition, roasting (sintering), and selective leaching. It is shown that direct precipitation of tungstic acid during…