This article presents the results of research conducted to determine the optimal conditions for the flotation beneficiation of alunite ores of the Gushsai deposit. During the research, the influence of the degree of grinding, pH of the alkaline medium, and reagent consumption on the flotation extraction efficiency of alunite was studied. As a result of the experiments, the optimal technological conditions were determined to be: grinding fineness of 85% passing through -0.074 mm, alkaline environment with pH=10, sodium oleate consumption of 500 g/t, and tall oil consumption of 500 g/t. As a result of flotation conducted using a scheme of sequential introduction of the collecting reagent and separate foam collection, the alunite recovery in the overall concentrate reached 94.3%. Furthermore, flotation processes carried out in a closed cycle increased the alunite content in the concentrate to 60.97%, with a recovery rate of 87.48%. The obtained results were analyzed, and recommendations were provided for developing an effective technology for the beneficiation of alunite ores.
| Mualliflar | Almatov, Ilxomjon Mirzabeko‘g‘li, Bekpulatov, Javlon Mustafokuliyevich, Alimov, Dilshod Shirinkulovich, Алматов, Илхомжон Мирзабекугли, Бекпулатов, Жавлон Мустафокулиевич, Алимов, Дилшод Ширинкулович, Almatov, Ilkhomjon, Bekpulatov, Javlon, Alimov, Dilshod |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-11-12 |
| Jild | 3 |
| Son | 4 |
| Betlar | 89-93 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.4.2025.12 |
DOI: 10.70769/3030-3214.srt.3.4.2025.12 · Maqolaning asl sahifasi
Alunit, Go‘shsoy koni, flotatsiya, alunit konsentrati, flotatsiya sxemasi
High-Temperature Hydrogen Attack (HTHA) is a critical degradation phenomenon that significantly reduces the service life of carbon and low-alloy steels widely used in the oil and gas, chemical, and power industries…
This article describes the scientific basis of the need to create a technology for obtaining fire-resistant organic materials based on polyvinyl chloride and mineral fillers for today's modern construction industry, as…
The scientific principles and practical significance of preheating (preheat) and post-weld heat treatment (PWHT – Post Weld Heat Treatment) technologies in the welding of materials have been analyzed. The primary…
5-Hydroxymethylfurfural (5-HMF) is recognized as a key platform molecule in the bioeconomy, serving as a precursor for the production of biofuels (2,5-dimethylfuran, 5-ethoxymethylfurfuryl ether), biopolymers…
The sequence and criteria for selecting the optimal absorbent or their combined absorbents for selective purification of natural gas from acidic components are considered, as well as the problems of absorption…
This article analyzes the processing stages of scheelite concentrates, including acid decomposition, roasting (sintering), and selective leaching. It is shown that direct precipitation of tungstic acid during…
The article examines the scientific basis of corrosion of pipelines and tanks used for storing products in the oil and gas industry, types of corrosive environments and their negative impact, as well as the reasons for…
The moisture content of cotton significantly affects the quality of its storage and processing. Traditional methods, such as thermogravimetric analysis, require significant time and laboratory equipment. In this work, a…
This article presents an in-depth study of the mineralogical composition of saponite samples obtained from the Uchtut deposit in the Navbahor district of Navoi region, Uzbekistan. The research was conducted using…
The accelerated digitalisation of economic systems has profoundly altered the nature of empirical research, particularly in the field of econometrics. The integration of information technologies has facilitated more…