The article examines the scientific basis of corrosion of pipelines and tanks used for storing products in the oil and gas industry, types of corrosive environments and their negative impact, as well as the reasons for their occurrence. The main objective of scientific research is the primary purification of products at oil and gas fields and the creation of particularly aggressive environments for them before preparing them for processing. Currently, the study of heterocomposite polymer products based on modern technologies for protecting metal structures and equipment and their application in industrial sectors dictates the need to develop such products. The growing content of liquefied gases not only in petroleum products but also in natural gases produced today poses a serious problem for the protection of metal equipment in this industry and the extension of its service life.
| Mualliflar | Dustkobilov, Eldor Nurmamatovich, Yuldashev, Tashmurza Rakhmonovich, Djumbabayev, Alijon Bakishyevich, Дусткобилов, Эльдор Нурмаматович, Юлдашев, Ташмурза Рахмонович, Джумабаев, Алижон Бакышевич, Dustqobilov, Eldor Nurmamatovich, Yuldashev, Tashmurza Raxmonovich, Djumabayev, Alijon Bakishyevich |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-11-24 |
| Jild | 3 |
| Son | 4 |
| Betlar | 152-158 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.4.2025.17 |
DOI: 10.70769/3030-3214.srt.3.4.2025.17 · Maqolaning asl sahifasi
hydroabrasiveness, inhibitor, polymer, design, thermosetting, thermoplastic, resins, phenolic, novolac, nylon, urethane, heterocomposite, гидроaбразивность, ингибитор, полимер, конструкция, термореактивный, термопластичный, смолы, фенольные, новолачные, нейлоновые, уретановые, гетерокомпозитные, gidroabrazivlik, ingibitor, polimer, konstruksiya, termoreaktiv, termoplastik, smolalar, fenol, novolak, neylon, uretan, geterokompozit
This article presents an in-depth study of the mineralogical composition of saponite samples obtained from the Uchtut deposit in the Navbahor district of Navoi region, Uzbekistan. The research was conducted using…
The sequence and criteria for selecting the optimal absorbent or their combined absorbents for selective purification of natural gas from acidic components are considered, as well as the problems of absorption…
This paper presents an integrated methodology for the quantitative assessment of Oil Displacement Efficiency by Water (ODEW) in fractured-porous carbonate reservoirs using a multivariate statistical analysis. We examine…
The scientific principles and practical significance of preheating (preheat) and post-weld heat treatment (PWHT – Post Weld Heat Treatment) technologies in the welding of materials have been analyzed. The primary…
The article examines the issue of intensifying gas extraction from water-flooded reservoirs. The wells of the Shimoliy Berdakh field are taken as an example, where almost all 48 wells in the operational fund produce…
High-Temperature Hydrogen Attack (HTHA) is a critical degradation phenomenon that significantly reduces the service life of carbon and low-alloy steels widely used in the oil and gas, chemical, and power industries…
The article analyzes the geological and petrochemical features of the Yakhton magmatic-metallogenic structure. It has been shown that the main magmatic components - granitoids, lamprophyres, and alkaline basaltoids…
This article presents the results of research conducted to determine the optimal conditions for the flotation beneficiation of alunite ores of the Gushsai deposit. During the research, the influence of the degree of…
Under conditions of increasing depth and complexity of well overhaul, especially during the opening of the second wellbore under conditions of abnormally low reservoir pressure (APDC), the risk of complications arising…
This article describes the scientific basis of the need to create a technology for obtaining fire-resistant organic materials based on polyvinyl chloride and mineral fillers for today's modern construction industry, as…