This article examines the issues of sustainable development of renewable energy sources and modern technologies for motor fuel production. In particular, it analyzes the effective application of cryogenic methods in obtaining various types of synthetic fuels, new technologies for producing motor fuel based on methanol, as well as the synthesis of dimethyl ether and its potential use as a fuel for diesel engines. The study also highlights the pathways of fuel production through methane conversion, the advantages of adiabatic processes in dimethyl ether production, and scientifically grounded solutions for environmental protection and the mitigation of ecological challenges.
| Mualliflar | Yuldashev, Tashmurza Rakhmanovish, Abdullaev, Shakhzod Abdirakhmonugli, Юлдашев, Ташмурза Рахманович, Абдуллаев, Шахзод Абдирахмонугли, Yuldashev, Tashmurza Raxmanovish, Abdullayev, Shaxzod Abdiraxmono‘g‘li |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-10-04 |
| Jild | 3 |
| Son | 3 |
| Betlar | 144-151 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.3.2025.23 |
DOI: 10.70769/3030-3214.srt.3.3.2025.23 · Maqolaning asl sahifasi
methanol, dimethyl ether, methanol feedstock, liquid hydrocarbons, adiabatic process, catalysts, methanol dehydration, condensation, syngas, метанол, диметиловый эфир, метанолное сырьё, жидкие углеводороды, адиабатический процесс, катализаторы, дегидратация метанола, конденсация, синтез-газ, metanol, dimetil efiri, metanol xomashyosi, suyuq uglevodorodlar, adiabatik jarayon, katalizatorlar, metanolni degidratsiyasi, kondensatsiyalash, sintez-gaz
This scientific article studies the energy-saving technology of the process of obtaining potassium nitrate from local raw materials. During the research, potassium chloride from the Dehqanabad Potassium Plant and…
This article investigates the optimal conditions for the spectrophotometric determination of zinc ions using the reagent 4-(2-pyridylazo)-resorcinol (PAR). The optical density of the zinc–PAR complex was studied under…
In this article, the influence of various factors - temperature, time, oxidizing medium, mixing speed, and the participation of stabilizers - on the thermooxodestruction process of JM-380 polypropylene was…
This article discusses the development of polymer-bitumen compositions for asphalt pavements. Local bitumen was modified using rubber powder, elastomers, and antioxidants, and their physicomechanical and rheological…
This paper presents a laboratory-scale process for recovering palladium and platinum from technogenic wastes generated at Almalyk MMC. The flowsheet was optimized as follows: thiourea precipitation of a Pd complex…
The scientific article analyzes the sequence and criteria for selecting optimal absorbents or their combinations for the selective removal of acidic components from natural gas, as well as challenges within…
This article discusses the development of an effective beneficiation technology for copper-porphyry ores in Uzbekistan, taking into account local conditions. It provides a mineralogical and chemical characterization of…
This scientific paper provides concise information on solar panels, describes the synthesis process of the phthalocyanine pigment used in the production of solar cells, and presents its infrared (IR) spectral analysis…
This article presents the results of the development of a hydrometallurgical technology for the comprehensive processing of copper anode slimes with the aim of extracting platinum group metals (PGMs). The study proposes…
The purpose of this article is to analyse the problems affecting the increase in fuel consumption of mine dump trucks, as well as the efficiency of BelAZ dump trucks. Various methods of determining fuel consumption…