This scientific paper provides concise information on solar panels, describes the synthesis process of the phthalocyanine pigment used in the production of solar cells, and presents its infrared (IR) spectral analysis. A copper-based phthalocyanine sample was analyzed using a PerkinElmer Fourier-transform infrared spectrometer (FTIR), which resulted in the identification of existing functional groups. According to the spectral data, peaks characteristic of aromatic rings, carbonyl, hydroxyl, ether, nitrile, and metal-oxygen (Cu-O) bonds were detected in the sample. The obtained results confirm the presence of a phytochemical compound in the sample that forms a complex with copper ions. This analysis is crucial for an in-depth study of the composition of phthalocyanine-based solar cells and for evaluating the potential to enhance their photoelectric efficiency.
| Mualliflar | Mustafaev, Mukhammad-Ali Nuraliugli, Karimov, Masud Ubaydullaugli, Djalilov, Abdulakhat Turapovich, Мустафаев, Мухаммад-Али Нуралиугли, Каримов, Масуд Убайдуллаевич, Джалилов, Абдулахат Турапович, Mustafayev, Muhammad-Ali Nuralio‘g‘li, Karimov, Mas’ud Ubaydullao‘g‘li, Djalilov, Abdulahat Turapovich |
|---|---|
| Jurnal | Саноатда рақамли технологиялар |
| Nashr sanasi | 2025-09-07 |
| Jild | 3 |
| Son | 3 |
| Betlar | 169-172 |
| Til | O‘zbek |
| DOI | 10.70769/3030-3214.srt.3.3.2025.15 |
DOI: 10.70769/3030-3214.srt.3.3.2025.15 · Maqolaning asl sahifasi
Solar cell, phthalocyanine pigment, phthalic anhydride, copper (I) chloride, boric acid, urea, sulfuric acid, sodium carbonate, IR spectrum, Солнечный элемент, фталоцианиновый пигмент, фталевый ангидрид, хлорид меди (I), борная кислота, карбамид, серная кислота, карбонат натрия, ИК-спектр, Quyosh elementi, ftalosianin pigmenti, ftol angidrid, mis(I)xlorid, borat kislotasi, karbomid, sulfat kislota, natriy karbonat, IR spektori
The scientific article analyzes the sequence and criteria for selecting optimal absorbents or their combinations for the selective removal of acidic components from natural gas, as well as challenges within…
The purpose of this article is to analyse the problems affecting the increase in fuel consumption of mine dump trucks, as well as the efficiency of BelAZ dump trucks. Various methods of determining fuel consumption…
This article discusses the development of polymer-bitumen compositions for asphalt pavements. Local bitumen was modified using rubber powder, elastomers, and antioxidants, and their physicomechanical and rheological…
This article examines the negative impacts on power quality during the operation of electric arc furnaces, with a particular focus on voltage asymmetry and reactive power flows. The need to ensure continuous furnace…
This article investigates the optimal conditions for the spectrophotometric determination of zinc ions using the reagent 4-(2-pyridylazo)-resorcinol (PAR). The optical density of the zinc–PAR complex was studied under…
Оil and gas pipеlinеs transpоrt gasеs оvеr lоng distancеs, mоstly thrоugh mеtal pipеs. Оil and pеtrоlеum prоducts arе purifiеd frоm tоxic cоmpоunds in thе primary fiеld and stоrеd in a largе tank bеfоrе bеing lоadеd…
This article examines the issues of sustainable development of renewable energy sources and modern technologies for motor fuel production. In particular, it analyzes the effective application of cryogenic methods in…
The growing demand for copper and the depletion of easily processable sulfide copper ore reserves necessitate the processing of oxidized, compositionally mixed, and off-balance copper ores to extract valuable…
This scientific article studies the energy-saving technology of the process of obtaining potassium nitrate from local raw materials. During the research, potassium chloride from the Dehqanabad Potassium Plant and…
This paper explores modern technological approaches to recycling dust waste generated during the production of ferrosilicon. The study focuses on metallurgical dusts with a high content of silicon dioxide (SiO₂) as the…