Based on the experiments conducted with a change in the number of grate faces in the cotton dragging zone, it has a sinusoidal (triangular) shape relative to the cotton along the grate faces, with a different angle of location, which leads to the release of impurities of various masses and different depths of presence in the cotton. The force of the impact load has the greatest impact on the amount of released impurities, provided that the natural quality of the fiber is preserved; the distance of the grate from the rotating drum should ensure the free passage of the fly. When a cotton piece hits and interacts with the grate, it is important that the behavior of the specks results in a chaotic arrangement.
| Mualliflar | Mirzaumidov, Asilbek, Nurulloyeva, Khosiyat, Abdusamatov, Alisher |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2025-09-30 |
| Jild | 10 |
| Son | 3 |
| Betlar | 49-53 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v10i3.855 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v10i3.855 · Maqolaning asl sahifasi
raw cotton, cleaner, small and large trash, saw, spiked, transporting, drum, belt drive, motion law, motor, angular velocity, torque, power, stiffness, dissipation, productivity, cleaning effect
| APA | Mirzaumidov, Asilbek, Nurulloyeva, Khosiyat, & Abdusamatov, Alisher (2025). EXPERIMENTAL DETERMINATION OF THE LOAD ON THE MULTIFACETED COLUMNS ON THE ELASTIC SUPPORTS OF THE COTTON GINNER. Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 49-53. https://doi.org/10.61151/stjniet.v10i3.855 |
|---|---|
| GOST (OAK) | Mirzaumidov, Asilbek, Nurulloyeva, Khosiyat, Abdusamatov, Alisher EXPERIMENTAL DETERMINATION OF THE LOAD ON THE MULTIFACETED COLUMNS ON THE ELASTIC SUPPORTS OF THE COTTON GINNER // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2025. – T. 10, № 3. – P. 49-53. – DOI: 10.61151/stjniet.v10i3.855. |
| MLA | Mirzaumidov, Asilbek, Nurulloyeva, Khosiyat, and Abdusamatov, Alisher. “EXPERIMENTAL DETERMINATION OF THE LOAD ON THE MULTIFACETED COLUMNS ON THE ELASTIC SUPPORTS OF THE COTTON GINNER.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 49-53, 2025. https://doi.org/10.61151/stjniet.v10i3.855 |
| Chicago | Mirzaumidov, Asilbek, Nurulloyeva, Khosiyat, and Abdusamatov, Alisher. “EXPERIMENTAL DETERMINATION OF THE LOAD ON THE MULTIFACETED COLUMNS ON THE ELASTIC SUPPORTS OF THE COTTON GINNER.” Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 49-53 (2025). https://doi.org/10.61151/stjniet.v10i3.855 |
| Harvard | Mirzaumidov, Asilbek, Nurulloyeva, Khosiyat, and Abdusamatov, Alisher (2025) ‘EXPERIMENTAL DETERMINATION OF THE LOAD ON THE MULTIFACETED COLUMNS ON THE ELASTIC SUPPORTS OF THE COTTON GINNER’, Наманган муҳандисликтехнология институти илмийтехника журнали, 10(3), 49-53. https://doi.org/10.61151/stjniet.v10i3.855 |
| BibTeX | @article{mirzaumidovasilbek2025,
title = {EXPERIMENTAL DETERMINATION OF THE LOAD ON THE MULTIFACETED COLUMNS ON THE ELASTIC SUPPORTS OF THE COTTON GINNER},
author = {Mirzaumidov, Asilbek and Nurulloyeva, Khosiyat and Abdusamatov, Alisher},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2025},
volume = {10},
number = {3},
pages = {49-53},
doi = {10.61151/stjniet.v10i3.855},
url = {https://doi.org/10.61151/stjniet.v10i3.855}
} |
Boshqa maqola uchun iqtibos tayyorlash
Thе tеxtilе sеctоr rаnks аmоng thе lаrgеst industriеs wоrldwidе, with its mаrkеt vаluе рrоjеctеd tо rеаch USD 2.25 trilliоn by 2025. Rising еnvirоnmеntаl аwаrеnеss hаs sрurrеd incrеаsеd еffоrts tо аdорt sustаinаblе аnd…
In the context of today’s rapidly developing global economy, which is strongly driven by technological production, the issue of ensuring sustainability and safety in agricultural industries has become particularly…
The article provides information on the development of a tricolor LED emitter of the middle infrared region of the spectrum, consisting of a measuring LED chip for fibers with a wavelength of 1.8 microns, a measuring…
This article analyzes the issue of atmospheric pollution caused by particulate matter (PM2.5, PM10) in cotton processing enterprises. The efficiency of conventional dust collection devices—cyclones, cartridge filters…
In the article is presented an analysis of a fiber bottom stripping device in the cotton gin industry that allows increased airflow rate, consumes less air and improves the efficiency of stripping fibers from saw teeth…
This article examines design issues and calculations that take into account the dynamic nature of loads acting on machines. As is well known, all bodies with mass and elasticity are capable of oscillatory motion…
The article develops and substantiates a technological system for processing African catfish skin and producing leather from it. It is emphasized that taking into account the individual characteristics of fish skin…
Mathematical modeling of the physical-mechanical properties and technological indicators of knitted fabrics, along with their theoretical study through practical experiments, creates opportunities to improve the quality…
The article addresses one of the most pressing challenges in the modern textile industry - the need to increase the speed of spinning equipment while simultaneously enhancing yarn quality. The key element determining…
This study is focus on the impact of calcium chloride on the cheese yield and sensory properties during Swiss cheese manufacturing process. Therefore, a research plan was developed to change the amount of calcium…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2025-yil arxivi
The article is presented an analysis of the results of the study of the main technological parameters of the existing and improved cotton fiber condenser. The air flow rate and the coefficient of resistance inside the…
Insufficient smoothness of the saw cylinder shaft leads to impermissible misalignments in the gap between the columns, which has a very negative effect on the grinding process. In this case, using the method of…
In the article is presented an analysis of a fiber bottom stripping device in the cotton gin industry that allows increased airflow rate, consumes less air and improves the efficiency of stripping fibers from saw teeth…
In thе glоbаl dеvеlоpmеnt trеnd, spесiаl аttеntiоn is bеing pаid tо thе сrеаtiоn оf а simplifiеd nеw соnstruсtiоn оf thе wоrking bоdiеs оf tесhnоlоgiсаl mасhinеs, thе dеvеlоpmеnt оf struсturаl, kinеmаtiс аnd dуnаmiс…
This article is discussed the equation of motion of cotton fiber in the condenser, describing the motion of a fiber in a condenser, equations can be used that take into account the forces acting on the fiber, as well as…
Based on the experiments carried out with a change in the number of sides of the grate in the area of pulling raw cotton, it has a sinusoidal shape relative to the faces of the grate, with different angles of location…