Objective: to study the influence of changes in the operational properties of oils and to monitor worn cylinder liners of D-243 diesel engines and transport tractors in order to determine the influence of the lubricating properties of motor oils on the wear of the working surface of cylinder liners.Methods: during the research, the laws of the theory of lubrication, wear friction, as well as methods based on existing regulatory documents were used.Results. When the engine is running, the oil, together with the contaminants in it, enters the annular grooves of the piston. This mixture, being in the piston grooves in the form of a thin film, at high temperatures, as a result of subsequent oxidative processes, forms viscous asphalt-resin deposits, which reduce the gaps in the grooves and, acting like slot filters, begin to retain contaminants. When operating diesel engines, cylinder liners are exposed to high temperature and pressure, as a result of which microroughness appears on the working surface under the influence of tribomechanical and tribotechnical influences. To determine the amount of wear on the working surface of engine cylinder liners, linear and weight methods, as well as the micrometer method, are widely used.Conclusion. Experience has shown that contaminants in motor oil consist of particles with a metal base and particles of organic compounds - varnish, similar in structure to graphite. When using diesel fuel with optimal concentrations, less varnish was formed, because wear is reduced to a lesser extent. During engine operation, as a result of natural wear of the liner, the uneven operation of the cylinders increases, performance characteristics decrease, and technical and operational indicators deteriorate. When operating diesel engines, cylinder liners are exposed to high temperature and pressure, as a result of which microroughness appears on the working surface under the influence of tribomechanical and tribotechnical influences. Micrometering of the liner must be carried out in different planes and sections, at least 10, which requires a long time.
| Mualliflar | Utaev, Sobir, Turaev, A |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashriyot | Наманган муҳандислик-технология институти |
| ISSN | 2181-8622, 1682-8658 |
| Nashr sanasi | 2023-12-30 |
| Jild | 8 |
| Son | 4 |
| Betlar | 171-177 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.61151/stjniet.v8i4.348 |
| Indeksga qo‘shilgan | 2026-08-26 |
DOI: 10.61151/stjniet.v8i4.348 · Maqolaning asl sahifasi
liner, diesel, concentration, pollution, oil, micrometer, motor
| APA | Utaev, Sobir, & Turaev, A (2023). RESULTS OF A STUDY OF THE INFLUENCE OF OIL CONTAMINATION ON WEAR OF THE WORKING SURFACE OF DIESEL CYLINDER LINES. Наманган муҳандисликтехнология институти илмийтехника журнали, 8(4), 171-177. https://doi.org/10.61151/stjniet.v8i4.348 |
|---|---|
| GOST (OAK) | Utaev, Sobir, Turaev, A RESULTS OF A STUDY OF THE INFLUENCE OF OIL CONTAMINATION ON WEAR OF THE WORKING SURFACE OF DIESEL CYLINDER LINES // Наманган муҳандисликтехнология институти илмийтехника журнали. – 2023. – T. 8, № 4. – P. 171-177. – DOI: 10.61151/stjniet.v8i4.348. |
| MLA | Utaev, Sobir, and Turaev, A. “RESULTS OF A STUDY OF THE INFLUENCE OF OIL CONTAMINATION ON WEAR OF THE WORKING SURFACE OF DIESEL CYLINDER LINES.” Наманган муҳандисликтехнология институти илмийтехника журнали, 8(4), 171-177, 2023. https://doi.org/10.61151/stjniet.v8i4.348 |
| Chicago | Utaev, Sobir, and Turaev, A. “RESULTS OF A STUDY OF THE INFLUENCE OF OIL CONTAMINATION ON WEAR OF THE WORKING SURFACE OF DIESEL CYLINDER LINES.” Наманган муҳандисликтехнология институти илмийтехника журнали, 8(4), 171-177 (2023). https://doi.org/10.61151/stjniet.v8i4.348 |
| Harvard | Utaev, Sobir, and Turaev, A (2023) ‘RESULTS OF A STUDY OF THE INFLUENCE OF OIL CONTAMINATION ON WEAR OF THE WORKING SURFACE OF DIESEL CYLINDER LINES’, Наманган муҳандисликтехнология институти илмийтехника журнали, 8(4), 171-177. https://doi.org/10.61151/stjniet.v8i4.348 |
| BibTeX | @article{utaevsobir2023,
title = {RESULTS OF A STUDY OF THE INFLUENCE OF OIL CONTAMINATION ON WEAR OF THE WORKING SURFACE OF DIESEL CYLINDER LINES},
author = {Utaev, Sobir and Turaev, A},
journal = {Наманган муҳандисликтехнология институти илмийтехника журнали},
year = {2023},
volume = {8},
number = {4},
pages = {171-177},
doi = {10.61151/stjniet.v8i4.348},
url = {https://doi.org/10.61151/stjniet.v8i4.348}
} |
Boshqa maqola uchun iqtibos tayyorlash
The article describes how to fill polypropylene with oligomers containing nitrogen, phosphorus, and metal to produce heat-resistant and mechanically strong thermoplastic composite materials. Polypropylene compositions…
Experimentally, optimization of the time modes of neutron activation analysis of samples of natural media was carried out, based on the nuclear physical characteristics of the studied and “interfering” radionuclides…
All over the world today the problem of water scarcity is getting worse. At the moment, we see that in the countries of Central Asia, as well as in our republic, the shortage of water is increasing, the melting of ice…
Objective. The purpose of this research work is to study the adsorption isotherms of mesoporous silica adsorbents, their sorption-structural indicators and their relative surface area. Methods. Adsorption isotherms of…
In the article, the constructions of roller chain transmissions with a new composition, which work smoothly, have high durability, and have a longer service life, are developed for the drives of technological machines…
Abstract: Objective. Pyrogas treatment waste segregation and consists in choosing a selective extractant to extract the polymer mass from the hydrocarbon content. Methods. Segregation of waste, determining the…
Abstract Objective. Increasing the efficiency of solar cells and reducing the amount of material used in its production is one of the important tasks of today. Methods. A 3-way sensitive solar cell was designed for this…
This article presents practical research results and corresponding recommendations by creating the literature of a new generation, in the education system that should be carried out so that students become mature…
In this article, the limit parameters of the main factors affecting the performance of the improved working part of the yarn winding machine were determined, and their optimal values were determined by the method of…
Objective. When carrying out strength calculations of the metal structure of a weighing wagon, it is necessary to take the wall thickness into account, taking into account its reduction by the value of the average wear…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar · 2023-yil arxivi
Ensuring the reliability of internal combustion engines during operation requires a comprehensive approach, addressed in various areas. Addressing these issues is a pressing, complex task. The main factors include…
Purpose of the study: analysis of methods for assessing wear and monitoring of new and worn cylinder liners of diesel and gas diesel engines D-243. During the research, the laws of the theory of lubrication, wear…
Research on changes in the characteristics of oil in diesel and gas engines based on diesel. During the research, the laws of lubrication theory, methods of planning experiments and mathematical statistics, as well as…
This article examines compression as a meaning-oriented strategy in sign language translation and interpreting. Compression is understood not as arbitrary shortening, but as the selective reformulation of a source…
This study investigates the impact of Edge Computing on bandwidth utilization in Internet of Things (IoT)–driven Nigerian telecom networks. The rapid growth of IoT devices has significantly increased data traffic…
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
This article addresses the problem of improving an adaptive traffic signal control algorithm at urban intersections by taking into account the dynamic characteristics of traffic flow. Fixed-time control under conditions…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…