The article describes how to fill polypropylene with oligomers containing nitrogen, phosphorus, and metal to produce heat-resistant and mechanically strong thermoplastic composite materials. Polypropylene compositions, solution flow index determination, viscometric methods, bending strength determination using two-support methods, and bending, Charpy impact strength measurement methods are all discussed. The amount of filler used in the production of composite materials based on basalt mineral from polyvinyl chloride ranged from 1 mass part to 5 mass parts. The physicomechanical characteristics of the developed composite materials revealed that increasing the amount of filler decreases the material's fluidity. The optimal amount of basalt-containing fillers in the composite material, according to the results, is 5 parts by mass.
| Mualliflar | Dusanov, Ravshan |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2023-12-30 |
| Jild | 8 |
| Son | 4 |
| Betlar | 77-81 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v8i4.343 |
DOI: 10.61151/stjniet.v8i4.343 · Maqolaning asl sahifasi
polyvinyl chloride, basalt mineral, atomic force microscopy, physical-chemical and mechanical properties
Textile industry enterprises are of strategic importance for the development of the economy of Uzbekistan. therefore, the unsatisfactoriness of harmonization with the requirements of national and international standards…
Experimentally, optimization of the time modes of neutron activation analysis of samples of natural media was carried out, based on the nuclear physical characteristics of the studied and “interfering” radionuclides…
This research work analyzes the issues of establishing the calibration interval of measuring instruments and predicting metrological accuracy. The issue of implementing the methods given in the international…
All over the world today the problem of water scarcity is getting worse. At the moment, we see that in the countries of Central Asia, as well as in our republic, the shortage of water is increasing, the melting of ice…
Objective. The purpose of this research work is to study the adsorption isotherms of mesoporous silica adsorbents, their sorption-structural indicators and their relative surface area. Methods. Adsorption isotherms of…
Objective. This article deals with production of organomineral fertilizers based on local raw materials cattle dung (cattle). local ores (Kyzilkum phosphorite flour (PF) and Navbahor bentonite) and nitrogen-fixing…
In the article, the constructions of roller chain transmissions with a new composition, which work smoothly, have high durability, and have a longer service life, are developed for the drives of technological machines…
Abstract. Objective. The article presents experimentally obtained values of the adsorption isotherm of ammonia molecules in synthetic zeolite CaA (M-22) at a temperature of 303 K. Isotherm values were measured using an…
Objective: to study the influence of changes in the operational properties of oils and to monitor worn cylinder liners of D-243 diesel engines and transport tractors in order to determine the influence of the…
Abstract: The article researches the degradation processes of PV panels at the 130 kW Namangan-Pop Solar photovoltaic plant (SPVP) as a result of seasonal climate effects. All PV panels installed in the SPVP are HSL…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar