Research on changes in the characteristics of oil in diesel and gas engines based on diesel. During the research, the laws of lubrication theory, methods of planning experiments and mathematical statistics, as well as methods based on existing regulatory documents were used. When processing experimental data, processing methods using Microsoft Office Excel application packages were used. The alkaline number in samples of used oils varies from 2.24 to 1.4, which indicates the emergency condition of the used oil. The results of analyzes of the alkaline number of the studied motor oils show that when the engine is running on gaseous fuel it decreased on average from 6.0 to 2.24 mg KOH/g, and when running on diesel fuel from 6.0 to 1.4 mg KOH/g g i.e. below the permissible level. According to the research results, we can say that in gas diesel engines, the content of mechanical impurities is less compared to diesel, the alkalinity after operation of 500 engine hours is closer to the maximum value of 2.24, the oil viscosity decreases insignificantly and after 500 engine hours is 9.3 mm2 /s, the oil service life increases by an average of 25%; in diesel engines, one of the main oil indicators, alkalinity and kinematic viscosity, are below acceptable values.
| Mualliflar | Utaev, Sobir |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2024-09-30 |
| Jild | 9 |
| Son | 3 |
| Betlar | 241-248 |
| Til | Ingliz |
| DOI | 10.61151/stjniet.v9i3.567 |
DOI: 10.61151/stjniet.v9i3.567 · Maqolaning asl sahifasi
engine, pollution, concentration, oil, reliability, additive, product, wear
The article deals with effective ways of assessing the technical condition of diesel locomotive diesel engine units, which allow timely detecting malfunctions and taking measures for their elimination. Modern means of…
This article provides an analysis of devices that capture heavy impurities from the composition of cotton raw materials available in cotton ginning enterprises and ways of their improvement. In addition, the condition…
There is a big use as carrying elements in technology and worker organ’s component design of technology. In article is organized review of the questions of the using and determinations mechanical parameters of component…
The article examines and analyzes the views of scientists regarding the operation of the public-private partnership mechanism. The author's concept of defining public-private partnership has been developed and some…
In the article, one of the most important results is that the magnitude of the bending rigidity of the saw working element package is a function of only the magnitude of the compression force of the package and the…
This article talks about adsorbents, in particular, activated carbons, which can be a solution to environmental and water pollution, which is the cause of today's urgent problems. Studies on the sources of raw materials…
In this article stressed about the concepts of state, governance and leadership and their content, their role in the coordination, organization, control, regulation, preservation and development of the social…
In the article, modified cationic starch (MCS) containing 80 percent of cotton cellulose, 20 percent of polyester (lavsan) fiber waste, carboxyl methyl cellulose (NaKMS) glue in the second stage, and acrylic emulsion…
This article analyzes the demographic potential of the Republic of Uzbekistan and its regional characteristics. Specific aspects of the number, structure and location of the country's population, regional differences in…
In the article, the adsorption properties of benzene vapor by adsorbents derived from Logon bentonite, activated through various thermal and chemical methods, were analyzed. The study highlights that chemical activation…
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar