Objective. The purpose of this work is to study the method of synthesizing an oligomer containing urethane groups without the isocyanate method, as well as to conduct an infrared spectroscopic analysis to determine the formed chemical bonds and functional groups in the resulting urethane oligomer. The influence of the temperature of the reaction mass and the reaction time on the average molecular weight of the resulting urethane oligomer is shown. The optimal temperature-time parameters for carrying out the synthesis process without an isocyanate urethane oligomer have been established. Methods. To achieve the goal of this study, a method was used to determine the formed chemical bonds and functional groups. Ethylene glycol, urea, formaldehyde, and phthalic anhydride were used to synthesize the urethane oligomer. The urethane oligomer was obtained by the chemical reaction of polycondensation under vacuum. To determine the optimal temperature and time of the polycondensation reaction, samples were selected that differ in the duration of the reaction, as well as in the temperature of the reaction system. The molecular weights of the samples were determined by cryoscopy. A graph of the dependence of the molecular masses of the samples on the duration of the polycondensation reaction at different temperatures was plotted. Results. The results of the experiments showed that an absorption band in the region of 1640.55 cm-1 was found in the IR spectrum, explaining the presence of the -CO-NH2 group and an absorption band in the region of 1732.08 cm-1, proving the presence of an unsubstituted urethane group.The study of the molecular weight of the obtained urethane oligomer by the cryoscopic method showed that the molecular weight of the oligourethane reaches 3921. The optimal temperature-time condition for the synthesis of this oligourethane is a chemical reaction at 160 ° C and for 120 minutes. Conclusion. The results obtained from the study of the urethane oligomer synthesis method without the isocyanate method indicate that the optimal condition for obtaining a urethane oligomer based on phthalic anhydride is the polycondensation reaction for 120 minutes at a temperature of 160 °C. this method allows to obtain without isocyanate urethane oligomer based on ethylene glycol, urea, formaldehyde and phthalic anhydride, with an average molecular weight reaching 3921.
| Mualliflar | Yusupov, Muzafar, Djalilov, Abdulakhat, Kiyomov, Sharifjon |
|---|---|
| Jurnal | Наманган муҳандисликтехнология институти илмийтехника журнали |
| Nashr sanasi | 2023-06-30 |
| Jild | 8 |
| Son | 2 |
| Betlar | 107-113 |
| Til | Ingliz |
Synthesis, isocyanate-free method, urethane oligomer, cryoscopy, IR spectroscopy
Purpose: the purpose of the research is to improve the quality of the beret based on the analysis of women's headdresses, to make effective use of natural and seasonal fabrics.Methods: in this article, the history of…
Objective. improve energy efficiency by adjusting the frequency of well pumping equipment. Methods. Frequency adjustment, thermal image management, analytical analysis, energy-efficient operating modes of pumps…
The article presents the results obtained from ultraviolet irradiation of sunflower seeds in order to obtain higher yields from sunflower, among other agrotechnical measures, to improve the quality indicators of seeds…
Summary The experimental results of determining the oil viscosity by controlling the vibration parameters in the operational state of the oil power…
Abstract. Recently, one of the modern directions of the theory of control, the theory of construction of state monitors of linear and nonlinear dynamic systems has significantly developed [2, 4, 10, 15]. The approach…
The article describes the technological properties of the process of obtaining an import-substituting adsorbent with high adsorption properties from local raw materials - plum kernel waste, obtained through processing…
Today, the application of water-oil emulsions will help not only increase the quality indicators of the product but also reduce its cost. This is done by introducing quality products into their composition. But it is…
This article discusses the issues of blending refined vegetable oils and the impact on fatty acid composition. The effect on its physicochemical properties has been studied.
Abstract: Objective. The article examines the effect of various components and the addition of chemical reagents (depressant additives) to improve the flowability of paraffin oils. The introduction of the additive…
LITERARY ANALYSIS NEW TECHNOLOGIES OF WOMEN'S OUTER CLOTHING FROM CARAKUL
Наманган муҳандисликтехнология институти илмийтехника журнали — barcha maqolalar