Today, the production of gasoline that meets Euro-5 and Euro-6 requirements isconsidered relevant. In this work, to increase the isomerization ability of the catalysts, the catalystsupport, aluminum oxide, was treated with hydrogen chloride. The main purpose of this is to increasethe acidity level of the alumina, and the acidity level of the catalysts is directly related to itsisomerization ability, that is, the higher the acidity level of the catalyst, the higher its isomerizationability. The results obtained show that the catalysts have similar properties. This can be explainedby the fact that the basis of these catalysts is aluminum oxide, and the concentrations of hardenedmetals are almost close to each other. It should be noted here that the sorption performance of thesecatalysts is close to that of isomerization catalysts used in industry. The antifriction strength of theresulting catalysts was determined according to GOST 16188-2015. This standard is intended todetermine the resistance of catalysts and sorbents to mechanical friction. This method is based onrotating a catalyst sample in an iron drum with a metal rod rotating at a certain constant speed. Itwas observed that the strength of the catalyst remained unchanged after cycling for a certain periodof time.
| Mualliflar | Karshiyev, Murodulla |
|---|---|
| Jurnal | Инновацион технологиялар |
| Nashriyot | Қарши муҳандислик-иқтисодиёт институти |
| ISSN | 2181-4732, 2181-4015 |
| Nashr sanasi | 2024-04-13 |
| Jild | 52 |
| Son | 04 |
| Til | Ingliz |
| Ilmiy soha | Geologiya-mineralogiya |
| Indeksga qo‘shilgan | 2026-08-26 |
sorption, Euro-5, Euro-6, aluminum oxide, catalyst, aromatic hydrocarbons, gasoline, octane number, reaction zone, palladium nitrate, nitric acid, hydrogen peroxide, distilled water, hydrogen chloride, sorbsion, yevro-5, yevro-6, alyuminiy oksidini, katalizator, aromatik uglevodorodlar, benzin, oktan soni, reaksion zona, palladiy nitrat, nitrat kislota, vodorod peroksid, distillangan suv, vodorod xlorid, сорбция, Евро-5, Евро-6, оксид алюминия, катализатор, ароматические углеводороды, бензин, октановое число, зона реакции, нитрат палладия, азотная кислота, перекись водорода, дистиллированная вода, хлороводород
| APA | Karshiyev, Murodulla (2024). OBTAINING CATALYSTS FOR ISOMERIZATION PROCESSES OF LIGHT PETROL FRACTIONS. Инновацион технологиялар, 52(04). https://ojs.qmii.uz/index.php/it/article/view/705 |
|---|---|
| GOST (OAK) | Karshiyev, Murodulla OBTAINING CATALYSTS FOR ISOMERIZATION PROCESSES OF LIGHT PETROL FRACTIONS // Инновацион технологиялар. – 2024. – T. 52, № 04. |
| MLA | Karshiyev, Murodulla. “OBTAINING CATALYSTS FOR ISOMERIZATION PROCESSES OF LIGHT PETROL FRACTIONS.” Инновацион технологиялар, 52(04), 2024. https://ojs.qmii.uz/index.php/it/article/view/705 |
| Chicago | Karshiyev, Murodulla. “OBTAINING CATALYSTS FOR ISOMERIZATION PROCESSES OF LIGHT PETROL FRACTIONS.” Инновацион технологиялар, 52(04) (2024). https://ojs.qmii.uz/index.php/it/article/view/705 |
| Harvard | Karshiyev, Murodulla (2024) ‘OBTAINING CATALYSTS FOR ISOMERIZATION PROCESSES OF LIGHT PETROL FRACTIONS’, Инновацион технологиялар, 52(04). https://ojs.qmii.uz/index.php/it/article/view/705 |
| BibTeX | @article{karshiyevmurodulla2024,
title = {OBTAINING CATALYSTS FOR ISOMERIZATION PROCESSES OF LIGHT PETROL FRACTIONS},
author = {Karshiyev, Murodulla},
journal = {Инновацион технологиялар},
year = {2024},
volume = {52},
number = {04},
url = {https://ojs.qmii.uz/index.php/it/article/view/705}
} |
Boshqa maqola uchun iqtibos tayyorlash
The practice of irrigation development of loess lands shows that the violations thathave occurred so far in the operation of hydraulic structures are explained by insufficient knowledgeand lack of consideration in the…
In order to implement the proposed technology based on the analysis of the Patentand research work, it was found that in a combined aggregate it is necessary to apply a roller with aballoon attached to the frame…
The use of building-integrated photovoltaic panel systems is treated in the literaturetaking into account the current state of research in this field. In this article, the entire research work is divided into two…
This article explains the creation of a scientific basis for a convenient, cost-effectivetechnology that allows the production of plasticized secondary polymer composite materials (PCM)by repeatedly recycling polymer…
In this article, transient processes of operation in asynchronous mode withoutexcitation of traditional and synchronous generators with biaxial excitation are experimentallydetermined. Oscillograms of voltage and…
This work, using a new instrumental method and a new indicator, provides aquantitative, objective and reliable assessment of the quality of grain and grain products whenassessing their damage by pathogens “potato stick…
In this article, a complete analysis of grape leaves reveals their unique composition,and the presence of tartaric, citric, succinic and oxalic acids in grape leaves is determined by reversephase high-performance liquid…
This article increases the nutritional value of the product by supplementing thecomposition of wheat flour based on semi-finished products. By mixing wheat and oat flour with eachother, the number of drops, the level of…
This article discusses the problems of assessing the technical condition of metalstructures used at industrial production facilities, ensuring safety and reducing risks in construction.Development of technology for the…
Under the conditions of old-irrigated typical sierozem soils of the Kashkadaryaregion, various green manure crops were assessed for the first time in terms of growth, development,yield of green mass and seeds, and…
Инновацион технологиялар — barcha maqolalar · 2024-yil arxivi
Relevance: a gas-engine unit MWM TCG 3020 V20 with an electrical output of 2300 kW, installed in a mini-CHP modular building, is an intense noise source — the sound pressure level near the running engine reaches 100–105…
Relevance: The Kyrgyz Republic has a significant solar radiation resource, but its power sector relies mainly on hydropower, and the winter load peak coincides with the seasonal minimum of river flow. A consistent…
Relevance: Overhead transmission lines rated at 110–220 kV are essential components of regional power systems and the electricity supply infrastructure of large industrial enterprises. Increasing demand, changing…
Relevance: the work is driven by the need to analyze existing heat supply systems and research the integration of modern, non-traditional energy sources– alongside the implementation of digitalization in the thermal…
Relevance: oil-immersed power transformers are among the most expensive and critical components of power supply systems, and their failures cause significant economic losses and long outages. Existing online monitoring…
Relevance: the modern global power industry is undergoing a transformation from centralized generation systems to distributed ones with a high share of renewable energy sources (RES). This process is driven by the…