This article reviews various techniques for separating and recovering zinc and cobalt from different industrial by-products. The methods discussed include ammonium sulfate leaching, alkaline leaching, solvent extraction using organic solvents, precipitation with α-nitroso-β-naphthol, and oxidative and sulfating roasting. It is shown that ammoniacal treatment achieves up to 96.98% cobalt extraction but does not allow for its separation from zinc. Cyanex 925 extracts zinc approximately 1,211 times more preferentially than cobalt, which indicates a high separation selectivity. During alkaline leaching, 96.33% of zinc is transferred into the solution, while only 4.02% of cobalt is extracted, resulting in the concentration of Co in the residue increasing more than tenfold. The processing of α-nitroso-β-naphthol cake through acid washing, roasting, and aqueous leaching ensures the extraction of over 95% of the cobalt. Processing α-nitroso-β-naphthol cake through acid washing, roasting, and water leaching ensures the extraction of over 95% cobalt. The advantages and limitations of the technologies reviewed were identified, including the consumption of expensive reagents, the generation of additional secondary waste, and the need for complex downstream purification of the resulting solutions.
| Mualliflar | Karshiev , Khumoyun, Khasanov , Abdirashid |
|---|---|
| Jurnal | Techscience.uz - техника фанлари долзарб масалалри |
| Nashriyot | Жиззах политехника институти |
| ISSN | 3030-3702, 3030-3702 |
| Nashr sanasi | 2026-09-16 |
| Jild | 4 |
| Son | 9 |
| Betlar | 62-73 |
| Til | Ingliz |
| Ilmiy soha | Texnika |
| DOI | 10.47390/ts-v4i9y2026n08 |
| Indeksga qo‘shilgan | 2026-09-17 |
DOI: 10.47390/ts-v4i9y2026n08 · Maqolaning asl sahifasi
cobalt, zinc, technogenic industrial products, ammonium leaching, alkaline leaching, solvent extraction, DEHPA, Cyanex 272, Cyanex 925, α-nitroso-β-naphthol, selective separation, oxidative roasting, sulfate roasting, cobalt cake, secondary raw materials., кобальт, цинк, техногенные промпродукты, аммиачное выщелачивание, щелочное выщелачивание, экстракция растворителем, Д2ЭГФК, Cyanex 272, Cyanex 925, α-нитрозо-β-нафтол, селективное разделение, окислительный обжиг, сульфатизирующий обжиг, кобальтовый кек, вторичное сырьё.
| APA | Karshiev , Khumoyun, & Khasanov , Abdirashid (2026). PROMISING METHODS FOR PROCESSING COBALT-BEARING WASTES FROM ZINC PRODUCTION. Techscience.uz - техника фанлари долзарб масалалри, 4(9), 62-73. https://doi.org/10.47390/ts-v4i9y2026n08 |
|---|---|
| GOST (OAK) | Karshiev , Khumoyun, Khasanov , Abdirashid PROMISING METHODS FOR PROCESSING COBALT-BEARING WASTES FROM ZINC PRODUCTION // Techscience.uz - техника фанлари долзарб масалалри. – 2026. – T. 4, № 9. – P. 62-73. – DOI: 10.47390/ts-v4i9y2026n08. |
| MLA | Karshiev , Khumoyun, and Khasanov , Abdirashid. “PROMISING METHODS FOR PROCESSING COBALT-BEARING WASTES FROM ZINC PRODUCTION.” Techscience.uz - техника фанлари долзарб масалалри, 4(9), 62-73, 2026. https://doi.org/10.47390/ts-v4i9y2026n08 |
| Chicago | Karshiev , Khumoyun, and Khasanov , Abdirashid. “PROMISING METHODS FOR PROCESSING COBALT-BEARING WASTES FROM ZINC PRODUCTION.” Techscience.uz - техника фанлари долзарб масалалри, 4(9), 62-73 (2026). https://doi.org/10.47390/ts-v4i9y2026n08 |
| Harvard | Karshiev , Khumoyun, and Khasanov , Abdirashid (2026) ‘PROMISING METHODS FOR PROCESSING COBALT-BEARING WASTES FROM ZINC PRODUCTION’, Techscience.uz - техника фанлари долзарб масалалри, 4(9), 62-73. https://doi.org/10.47390/ts-v4i9y2026n08 |
| BibTeX | @article{karshievkhumoyun2026,
title = {PROMISING METHODS FOR PROCESSING COBALT-BEARING WASTES FROM ZINC PRODUCTION},
author = {Karshiev , Khumoyun and Khasanov , Abdirashid},
journal = {Techscience.uz - техника фанлари долзарб масалалри},
year = {2026},
volume = {4},
number = {9},
pages = {62-73},
doi = {10.47390/ts-v4i9y2026n08},
url = {https://doi.org/10.47390/ts-v4i9y2026n08}
} |
Boshqa maqola uchun iqtibos tayyorlash
Autonomous driving systems and Advanced Driver Assistance Systems (ADAS) heavily rely on precise visual recognition of traffic control infrastructure under varying real-world conditions. While traditional object…
The article presents a comparative analysis of four algorithms (MLP, ANFIS, LSTM, GRU) for predicting poorly structured processes. The MLP model showed the highest accuracy (R²=0.613). Due to the limited accuracy of all…
This paper proposes an integrated decision model for forecasting technical-service demand and allocating limited maintenance resources in agro-industrial complexes. The forecasting layer represents daily, intermittent…
This study develops a reproducible computational framework for groundwater flow simulation and constrained abstraction planning. A conservative finite-volume scheme with harmonic interface transmissivity and backward…
This paper substantiates methods for developing virtual instruments for environmental control of industrial products (temperature, humidity, dust levels, and gas impurities). An instrument architecture combining data…
This paper describes the experience of implementing the proposed neural network (NN) based routing protocol algorithm. This approach aims to improve the clustering efficiency. Energy consumption is an important factor…
This study presents the development of an integrated dynamic model of a micro-hydropower plant using the MATLAB/Simulink and Sims cape environments. The proposed model combines hydraulic, mechanical, control, and…
The paper substantiates the optimal operating mode of screw and two-stage reciprocating compressors using a combined thermodynamic–electromechanical model. The effects of load, network pressure and intercooling…
The paper presents a fuzzy-logic model for assessing the durability criterion of roller sections in the secondary cooling zone of a continuous casting machine. It is a chain of three fuzzy controllers with casting…
We evaluated a state-aware, verifiable RAG tutor on 72 English-language tasks across three conditions and two runs. Linguistic accuracy showed no condition effect, while retrieval faithfulness tracked evidence access…
Techscience.uz - техника фанлари долзарб масалалри — barcha maqolalar · 2026-yil arxivi
В статье анализируются современные гидрометаллургические методы извлечения кобальта из промежуточных продуктов цинкового производства. Особое внимание уделяется кекам с содержанием кобальта 0,5-3,0% и цинка 40-60%…
This article examines compression as a meaning-oriented strategy in sign language translation and interpreting. Compression is understood not as arbitrary shortening, but as the selective reformulation of a source…
This study investigates the impact of Edge Computing on bandwidth utilization in Internet of Things (IoT)–driven Nigerian telecom networks. The rapid growth of IoT devices has significantly increased data traffic…
This article analyzes the scientific, pedagogical, and methodological foundations for the effective integration of national upbringing factors with modern global competencies in the context of continuous education…
This article addresses the problem of improving an adaptive traffic signal control algorithm at urban intersections by taking into account the dynamic characteristics of traffic flow. Fixed-time control under conditions…
Maqolada paxta xomashyosini yirik iflosliklardan tozalash jarayonida arrali baraban va kolosnikli panjara o‘rtasidagi o‘zaro ta’sirni takomillashtirish masalasi ko‘rib chiqilgan. Mavjud tozalagichlarda qo‘llaniladigan…
Maqolada paxta xomashyosini yirik va mayda iflosliklardan tozalash samaradorligini oshirishga qaratilgan ilmiy tadqiqotlar tizimlashtirilib, konstruktiv va texnologik omillarning o‘zaro ta’siri qiyosiy tahlil qilindi…